Related papers: Deformation Localisation in Ion-Irradiated FeCr
Understanding the mechanisms of plasticity in structural steels is essential for the operation of next-generation fusion reactors. Elemental composition, particularly the amount of Cr present, and irradiation can have separate and…
Ion-irradiated FeCr alloys are useful for understanding and predicting neutron-damage in the structural steels of future nuclear reactors. Previous studies have largely focused on the structure of irradiation-induced defects, probed by…
Fe-Cr binary alloys serve as simplified model systems to study irradiation damage relevant to fusion structural materials. Here, Fe-3%Cr and Fe-5%Cr samples were irradiated with 4 MeV Fe ions under a dose rate of 4x10^5 dpa/s across a…
Predicting the dramatic changes in material properties caused by irradiation damage is key for the design of future nuclear fission and fusion reactors. Self-ion implantation is an attractive tool for mimicking the effects of neutron…
Ferritic/martensitic steels will be used as structural components in next generation nuclear reactors. Their successful operation relies on an understanding of irradiation-induced defect behaviour in the material. In this study, Fe and FeCr…
In this paper, experimental work is supported by multi-scale numerical modeling to investigate nanomechanical response of pristine and ion irradiated with Fe2+ ions with energy 5 MeV high purity iron specimens by nanoindentation and…
A central focus in high strain rate research is understanding the dynamic behavior of materials at strain rates where a strength upturn is observed. While strength upturns at strain rates of $10^3$ to $10^4~\mathrm{s}^{-1}$ have been widely…
FeCrAl ODS steels for accident tolerant fuel claddings are designed to bear high-Cr and Al for enhancing oxidation resistance. In this study, we investigated the effects of Cr content on ion-irradiation hardening of three ODS ferritic…
Tungsten is the main candidate material for plasma-facing armour components in future fusion reactors. In-service, fusion neutron irradiation creates lattice defects through collision cascades. Helium, injected from plasma, aggravates…
Pure Fe and model Fe-Cr alloys containing 5, 10 and 14%Cr were irradiated with Fe+ ions at a maximum energy of 2MeV to the same dose of 0.6dpa at temperatures of 300 C, 400 C and 500 C, and at dose rates corresponding to 6 x 10-4 dpa/s and…
We investigated the effect of nano-structuring by high-pressure torsion (HPT) on the irradiation performance of Eurofer-97. Material was deformed to shear strains from 0 to ~230, and then exposed to Fe$^{3+}$ irradiation doses of 0.01 and…
A cluster deposition method was used to produce films of loosely aggregated nanoclusters (NC) of Fe core-Fe3O4 shell or fully oxidized Fe3O4. Films of these NC on Si(100) or MgO(100)/Fe3O4(100) were irradiated to 10^16 Si2+/cm2 near room…
Severe plastic deformation changes the microstructure and properties of steels, which may be favourable for their use in structural components of nuclear reactors. In this study, high-pressure torsion (HPT) was used to refine the grain…
In this study structural and mechanical properties of a 1 um thick Al2O3 coating, deposited on 316L stainless steel by Pulsed Laser Deposition (PLD), subjected to high energy ion irradiation were assessed. Mechanical properties of pristine…
In this paper, we investigate plasticity in irradiated FeCrAl nanopillars using discrete dislocation dynamics simulations (DDD), with comparisons to transmission electron microscopic (TEM) in situ tensile tests of ion and neutron irradiated…
In this work, the evolution of nanomechanical properties was studied systematically as a function of temperature, chemical, and microstructural complexity of different Fe-based alloys. Experiments were performed at different temperatures…
Understanding the evolution of dislocation structures during plastic deformation is critical for predicting the mechanical performance of metallic materials. In this work, we applied in situ scanning electron microscopy/electron backscatter…
Effect of He ion irradiation on three model Fe(100-x)Cr(x) alloys (x =5.8, 10.75 and 15.15) was investigated with the conversion electron M\"ossbauer spectroscopy. The study of the alloys irradiated with 25 keV ions revealed that the…
Mass number dependence of the nuclear radii is closely related to the nuclear matter properties. It is known that the most of nuclei exhibit some deformation. We discuss how the nuclear density profile is modified by the nuclear deformation…
Ion implantation is widely used as a surrogate for neutron irradiation in the investigation of radiation damage on the properties of materials. Due to the small depth of damage, micromechanical methods must be used to extract material…