Related papers: CoSb3-based skutterudite nanocomposites prepared b…
A nanopowder from p-Bi-Sb-Te with particles ~ 10 nm were fabricated by the ball milling using different technological modes. Cold and hot pressing at different conditions and also SPS process were used for consolidation of the powder into a…
p-type Ce1.05Fe4Sb12.04 filled skutterudites with much improved thermoelectric properties have been synthesized by rapidly converting nearly amorphous ribbons into crystalline pellets under pressure. It is found that this process greatly…
In this report, the effect of the cold sintering process (CSP) on the electro-chemo-mechanical properties of 10 mol% Gd-doped ceria (GDC) is investigated. High purity nanoscale GDC powder is sintered via a cold sintering process (CSP) in…
NaTaO3-50wt% Fe2O3 composite ceramics showed a large Seebeck voltage of -300 mV at a temperature gradient of 650 K yielding a constant Seebeck coefficient of more than -500 microV/K over a wide temperature range. We report for the first…
Sb-doped Bi2Te3 is known since the 1950s as the best thermoelectric material for near-room temperature operation. Improvements in material performance are expected from nanostructuring procedures. We present a straightforward and fast…
CoSb3, a skutterudite compound, is key in studying thermoelectric materials. Under compression, it undergoes a 'self-insertion' isostructural transition, redistributing large Sb atoms among crystallographic sites. We investigated CoSb3's…
The preparation method of thermoelectric PbTe-CdTe semiconductor nanocomposite in the form of a bulk material doped with Bi, I or Na, intended for production the mid-temperature thermoelectric energy generators is presented. The method…
This is the first report on the enhanced thermoelectric (TE) properties of novel Bi2S3-Bi nanocomposites synthesized using a one-step polyol method at different reaction temperatures (TRe) and time. They are well-characterized as…
Spark plasma sintering (SPS) technique is applied in combination with hydrogen decrepitation process for the recycling of SmCo5 magnets. The SmCo5 magnets for recycling were first decrepitated by hydrogen gas of a pressure of 4 bar for 3…
Nanostructure CoSb3 samples were synthesized via hydrothermal technique along with different routes to study the phaseevolution in Co-Sb system. X-ray diffraction (XRD) explored to study the phase evolution in Co-Sb system via. Special…
We optimize the superconducting properties of Sm-based oxypnictide (Sm1111: SmFeAsO0.80F0.20) by using the Spark Plasma Sintering (SPS) technique under various synthesis conditions, including heating temperatures ranging from 600 to 1000…
We study magnetic, transport and thermal properties of Cobalt carbide nanocomposite with a mixture of Co2C and Co3C phases in 1:1 ratio, with an average particle diameter of 40$\pm 15$ nm. We show that the behavior of the nanocomposite is…
Novel filled skutterudites EpyNi4Sb12-xSnx (Ep = Ba and La) have been prepared by arc melting followed by annealing at 250C, 350C and 450C up to 30 days in sealed quartz vials. A maximum filling level of y = 0.93 and y = 0.65 was achieved…
We report electron spin resonance (ESR) measurements in the Gd3+ doped semiconducting filled skutterudite compound Ce1-xGdxFe4P12 (x = 0.001). As the temperature T varies from T = 150 K to T = 165 K, the Gd3+ ESR fine and hyperfine…
The best p-type skutterudites so far are didymium filled, Fe/Co substituted, Sb-based skutterudites. Substitution at the Sb-sites influences the electronic structure, deforms the Sb4-rings, enhances the scattering of phonons on electrons…
Nanoparticle sintering remains a critical challenge in heterogeneous catalysis. In this work, we present a unified deep potential (DP) model for Cu nanoparticles on three Al$_2$O$_3$ surfaces ($\gamma$-Al$_2$O$_3$(100),…
We study the thermoelectric properties of Te-doped FeSb2 nanostructured samples. Four samples of stoichiometry FeSb1.84Te0.16 were prepared by a hot press method at temperatures of 200, 400, 500, and 600 oC. Te-doping enhances the…
There is evidence that magnetism can potentially increase the thermopower of materials, most likely due to magnon scattering, suggesting the incorporation of intrinsic magnetic semiconductors in non-magnetic thermoelectric materials. Here,…
The present study demonstrates a large enhancement in the Seebeck coefficient and ultralow thermal conductivity (TE) in Sb$_2$Te$_3$-AgSbTe$_2$ nanocomposite thin film. The addition of Ag leads to the in-situ formation of AgSbTe$_2$…
We report a solution-processed, ligand supported synthesis of 15-20 nm thick Sb(2-x)Bi(x)Te3 nanoplatelets. After complete ligand removal by a facile NH3-based etching procedure, the platelets are spark plasma sintered to a p-type…