Related papers: Sensitivity analysis of wall-modeled large-eddy si…
In wall-modeled large-eddy simulations (WMLES), the near-wall model plays a significant role in predicting the skin friction, although the majority of the boundary layer is resolved by the outer large-eddy simulation (LES) solver. In this…
This is the second part to our companion paper. The novel method to quantify artificial dissipation proposed in Part 1 is further applied in turbulent channel flow at $\mathrm{Re_\tau}=180$ using various subgrid-scale models, with an…
Traditional large eddy simulation is based on Kolmogrov's hypothesis, and done in the inertial range. In inertial range the LES model coefficient is scale-invariant. In many cases, such as computing in the boundary layer, the filter scale…
Microscale turbulence in porous media is a new physical phenomenon that exhibits unique properties unlike those in classical turbulence flows. At low values of porosity, the surface forces on the solid obstacles compete with the inertial…
The present work evaluates the effects of three inflow boundary conditions on large-eddy simulations of supersonic jet flows. The three inlet flow configurations considered are an inviscid profile, a stationary turbulent profile extracted…
This fluid dynamics video shows visualizations of a Large-Eddy Simulation (LES) of an over-expanded planar nozzle. This configuration represents the experimental setup of Papamoschou et. al. which found the position of the internal shock to…
High-resolution large-eddy simulation (LES) is exploited to study indoor air turbulence and its effect on the dispersion of respiratory virus-laden aerosols and subsequent transmission risks. The methodology is applied to assess two…
Temperature fluctuations in an atmospheric convective boundary layer are investigated by means of Large Eddy Simulations (LES). A statistical characterization for both weak temperature fluctuations and strong temperature fluctuations has…
Recent developments in vortex particle methods for simulating three-dimensional incompressible flows are presented. A lightweight, dynamic Large-Eddy Simulation model is tested, featuring a dynamic procedure that relies solely on Lagrangian…
Numerical modeling of turbulent spray combustion provides a promising tool for advanced engine design. In spray flames, the droplet evaporation not only reduces the ambient gas temperature, but also influences flame structure by generating…
Data-driven subgrid-scale (SGS) modeling in the large-eddy simulations (LES) suffers from the inconsistency between the \textit{a priori} tests and the a posteriori tests, which make training accurate SGS models a difficult task. We study…
Direct Numerical Simulations (DNSs) are one of the most powerful tools for studying turbulent flows. Even if achievable Reynolds numbers are lower than those obtained with experimental means, there is a clear advantage since the entire…
This study uses high-fidelity simulations (DNS or LES) and experimental datasets to analyse the effect of non-equilibrium streamwise mean pressure gradients (adverse or favourable), including attached and separated flows, on the statistics…
The present research proposes a new memory-efficient method using diffusion models to inject turbulent inflow conditions into Large Eddy Simulation (LES) and Direct Numerical Simulation (DNS) for various flow problems. A guided diffusion…
An innovative \textit{deep learning} approach has been adopted to formulate the eddy-viscosity for large eddy simulation (LES) of wall-bounded turbulent flows. A deep neural network (DNN) is developed which learns to evaluate the…
A resolvent-based methodology is employed to obtain spatio--temporal estimates of turbulent pipe flow from probe measurements of wall shear-stress fluctuations. Direct numerical simulations (DNS) and large-eddy simulations (LES) of…
A population balance model coupled with large eddy simulations (LES) is adapted and applied to study the evolution of oil droplets in a turbulent jet including the effects of droplet breakup. A key unknown in simulating secondary breakup in…
Boundary layers of adiabatic and isothermal curved walls are investigated for a supersonic turbine cascade, including the effects of shock-boundary layer interactions (SBLIs). Wall-resolved large eddy simulations (LES) are performed for a…
This work determines the inaccuracy of using Reynolds averaged Navier Stokes (RANS) turbulence models in transition to turbulent flow regimes by predicting the model-based discrepancies between RANS and large eddy simulation (LES) models…
Flows in square channels are common in applications, such as automotive after-treatment systems and heat exchangers. Flows with axial flow entry are well understood, but for oblique flow entry, there is no clarity on the additional pressure…