Related papers: The effect of initial texture on multiple necking …
In this paper, we predict the effect of texture on the anisotropy in plastic properties of polycrystalline metallic sheets. The constituent grain behavior is modelled using the new single crystal yield criterion developed by Cazacu, Revil,…
Grain growth fundamentally shapes the microstructure of crystalline materials upon annealing, affecting their overall mechanical and functional properties. Recently, it has been rationalized that grain growth in polycrystals does not result…
One of the main material properties altered by rare earth additions in magnesium alloys is texture, which can be specifically adjusted to enhance ductility and formability. The current study aims at illuminating the texture selection…
We present an original approach for predicting the static recrystallization texture development during annealing of deformed crystalline materials. The microstructure is considered as a population of subgrains and grains whose sizes and…
Necking instabilities, in which tensile (extensional) deformation localizes into a small spatial region, are generic failure modes in elasto-viscoplastic materials. Materials in this very broad class --- including amorphous, crystalline,…
A stochastic 3D microstructure model for polycrystals is introduced which incorporates two types of twin grains, namely neighboring and inclusion twins. They mimic the presence of crystal twins in $\gamma$-TiAl polycrystalline…
The effect of grain size on the flow stress of FCC polycrystals is analyzed by means of a multiscale strategy based on computational homogenization of the polycrystal aggregate. The mechanical behavior of each crystal is given by a…
A microstructure-based model that accounts for the effect of grain size has been developed to study the effect of grain size on the fatigue life of Inconel 718 alloys. The fatigue behavior of two alloys with different grain size was…
The onset of nonlinear effects in metals, such as plasticity and damage, is strongly influenced by the heterogeneous stress distribution at the grain level. This work is devoted to studying the local stress distribution of shear stresses…
This paper aims to elucidate the role of interface energy anisotropy in orientation selection during nucleation of new grains in a polycrystalline film growth. An assessment of (heterogeneous) nucleation probability as function of…
Plastic inhomogeneity, particularly localised strain, is one of the main mechanisms responsible for failures in engineering alloys. This work studied the spatial arrangement and distribution of microstructure and their influence in the…
Nanocrystalline materials have been proposed for use in future fusion reactors due to their high grain boundary density that may act as a sink for irradiation-induced defects. We use molecular dynamics to model collision cascades in…
The kinetics of dislocations is studied with computer simulation at loadings of different intensity. It is established that the dislocations have a few different structural states. The dislocations "with the micropore" play important role…
We report the results of a comparative study of the magnetic microstructure of textured and isotropic $\mathrm{Nd}_2\mathrm{Fe}_{14}\mathrm{B}/\alpha$-$\mathrm{Fe}$ nanocomposites using magnetometry, transmission electron microscopy,…
To explore the role of the olivine grain size and crystal preferred orientation (CPO) on the evolution of the microstructure and the mechanical behaviour of upper mantle rocks up to large strains, we performed axial extension experiments at…
Over low and intermediate strain rates, plasticity in face centered cubic (FCC) metals is governed by the glide of dislocations, which manifest as complex networks that evolve with strain. Considering the elastic anisotropy of FCC metals,…
Deformation heterogeneities within microstructures of polycrystalline shape memory alloys (SMAs) during superelastic stressing are studied using both experiments and simulations. In situ X-ray diffraction, specifically the far-field high…
Super-Earths exist around subsolar-metallicity host stars with a frequency comparable to that around solar-metallicity stars, suggesting efficient assembly of dust grains even in metal-deficient environments. In this study, we propose a…
The growth of solids from sub-micron to millimeter and centimeter sizes is the early step toward the formation of planets inside protoplanetary disks (PPDs). However, such processes and their potential impact on the later stages of solid…
A clear understanding of the dynamic behavior of metals is critical for developing superior structural materials as well as for improving material processing techniques such as cold spray and shot peening. Using a high velocity (from 120…