Related papers: Advancements in Upper Body Exoskeleton: Implementi…
Rehabilitation technology is a natural setting to study the shared learning and decision-making of human and machine agents. In this work, we explore the use of Hierarchical Reinforcement Learning (HRL) to develop adaptive control…
The compliant nature of soft wearable robots makes them ideal for complex multiple degrees of freedom (DoF) joints, but also introduce additional structural nonlinearities. Intuitive control of these wearable robots requires robust sensing…
This paper provides new results for a tracking control of the attitude dynamics of a rigid body. Both of the attitude dynamics and the proposed control system are globally expressed on the special orthogonal group, to avoid complexities and…
Computed-torque control requires a very precise dynamical model of the robot for compensating the manipulator dynamics. This allows reduction of the controller's feedback gains resulting in disturbance attenuation and other advantages.…
We introduce a robust control architecture for the whole-body motion control of torque controlled robots with arms and legs. The method is based on the robust control of contact forces in order to track a planned Center of Mass trajectory.…
We propose a method that simultaneously estimates and controls extrinsic contact with tactile feedback. The method enables challenging manipulation tasks that require controlling light forces and accurate motions in contact, such as…
This paper proposes an upper-limb exoskeleton teleoperation system based on magnetorheological (MR) clutches, aiming to improve operational accuracy and enhance the immersive experience during lunar sampling tasks. Conventional exoskeleton…
Control of compliant mechanical systems is increasingly being researched for several applications including flexible link robots and ultra-precision positioning systems. The control problem in these systems is challenging, especially with…
The rigid-body attitude tracking using vector and biased gyro measurements with unknown inertia matrix is studied in this note. First, a gyro-bias observer with global exponential stability is designed. Then, an attitude tracking controller…
A hybrid (i.e., physics-guided data-driven) feedforward tracking controller is proposed for systems with unmodeled linear or nonlinear dynamics. The controller is based on the filtered basis function (FBF) approach, hence it is called a…
Existing grasp controllers usually either only support finger-tip grasps or need explicit configuration of the inner forces. We propose a novel grasp controller that supports arbitrary grasp types, including power grasps with…
We present a trajectory planning and control architecture for bipedal locomotion at a variety of speeds on a highly underactuated and compliant bipedal robot. A library of compliant walking trajectories are planned offline, and stored as…
Wearable devices like exoskeletons are designed to reduce excessive loads on specific joints of the body. Specifically, single- or two-degrees-of-freedom (DOF) upper-body industrial exoskeletons typically focus on compensating for the…
This paper proposes a novel control law for accurate tracking of agile trajectories using a tailsitter flying wing unmanned aerial vehicle (UAV) that transitions between vertical take-off and landing (VTOL) and forward flight. The global…
In this paper, we prove that the dynamical model of a quadrotor subject to linear rotor drag effects is differentially flat in its position and heading. We use this property to compute feed-forward control terms directly from a reference…
The task of self-balancing is one of the most important tasks when developing humanoid robots. This paper proposes a novel external balance mechanism for humanoid robot to maintain sideway balance. First, a dynamic model of the humanoid…
Quadruped robots are machines intended for challenging and harsh environments. Despite the progress in locomotion strategy, safely recovering from unexpected falls or planned drops is still an open problem. It is further made more difficult…
Electromechanical switching devices, such as solenoid valves, contactors, and relays, suffer from undesirable phenomena like clicking, mechanical wear, and contact bounce. Despite that, they are still widely used in industry due to their…
Powered lower-limb exoskeletons provide assistive torques to coordinate limb motion during walking in individuals with movement disorders. Advances in sensing and actuation have improved the wearability and portability of state-of-the-art…
Robust closed-loop locomotion remains challenging for soft quadruped robots due to high-dimensional dynamics, actuator hysteresis, and difficult-to-model contact interactions, while conventional proprioception provides limited information…