Related papers: Analytical One-Dimensional Model of Drop Ejection …
The process of drop formation from a nozzle can be seen in many natural systems and engineering applications. Here, we investigate the formation of a liquid droplet from a wettable nozzle. The behavior of a drop is complicated due to an…
The production of small fluid droplets relies on an instability of solutions to the Young-Laplace equation. We ask whether smaller droplets can be produced by changing the shape of the nozzle. At a given critical pressure, the circular…
A free-falling absorbing liquid drop hit by a nanosecond laser-pulse experiences a strong recoil-pressure kick. As a consequence, the drop propels forward and deforms into a thin sheet which eventually fragments. We study how the drop…
When a droplet is generated, the ligament connecting the drop to the nozzle thins down and eventually pinches off. Adding solid particles to the liquid phase leads to a more complex dynamic, notably by increasing the shear viscosity.…
We conduct systematic experiments to investigate the dynamics of liquid jet breakup and the resulting droplet size distribution, emphasizing the influence of liquid jet velocity and needle exit diameter. We precisely control jet formation…
As shown by Ganan-Calvo and co-workers, a free liquid jet can be compressed in iameter through gas-dynamic forces exerted by a co-flowing gas, obviating the need for a solid nozzle to form a microscopic liquid jet and thereby alleviating…
Hydrodynamic collapse of a central air-cavity during the recoil phase of droplet impact on a superhydrophobic sieve leads to satellite-free generation of a single droplet through the sieve. Two modes of cavity formation and droplet ejection…
In this work, we introduce the novel technique of in-chip drop on demand, which consists in dispensing picoliter to nanoliter drops on demand directly in the liquid-filled channels of a polymer microfluidic chip, at frequencies up to 2.5…
We present physics-based nozzle design rules to achieve high-throughput and stable jetting in drop-on-demand liquid metal 3D printing. The design rules are based on scaling laws that capture the change of meniscus oscillation relaxation…
When a free-falling liquid droplet is hit by a laser it experiences a strong ablation driven pressure pulse. Here we study the resulting droplet deformation in the regime where the ablation pressure duration is short, i.e. comparable to the…
Discharging a liquid from a nozzle at sufficient large velocity leads to a continuous jet that due to capillary forces breaks up into droplets. Here we investigate the formation of microdroplets from the breakup of micron-sized jets with…
The ejection of liquid droplets from a nozzle is highly important for physics of fluid. The Weber number describes how much kinetic energy is needed to overcome the surface tension and create a free-flying droplet. According to literature…
The experimental time-lapse images of the breakup phenomenon of a charged droplet (diameter ~100-300 micro-m) levitated in an electrodynamic (ED) balance is reported. During the breakup process, a levitated charged droplet undergoes…
A thorough numerical, theoretical and experimental investigation of the liquid atomization in a full cone pressure swirl nozzle is presented. The first part is devoted to the study of the inner flow. CAD and CFD software are used in order…
The Plateau-Rayleigh instability causes the fragmentation of a liquid ligament into smaller droplets. In this study a numerical study of this phenomenon based on a single relaxation time (SRT) pseudo-potential lattice Boltzmann method (LBM)…
The magnetic droplet soliton is a large amplitude, coherently precessing wave state that exists in ferromagnetic thin films with perpendicular magnetic anisotropy. To effectively sustain a droplet, magnetic damping can be locally…
In this study, we investigate the transition between the Newtonian and the viscoelastic regimes during the pinch-off of droplets of dilute polymer solutions and discuss its link to the coil-stretch transition. The detachment of a drop from…
We study the effects of nozzle geometry on the dynamics of thin fluid films flowing down a vertical cylindrical fibre. Recent experiments show that varying the nozzle diameter can lead to different flow regimes and droplet characteristics…
A three-dimensional, volume-of-fluid (VOF) based CFD model is presented to investigate droplet formation in a microfluidic T-junction. Genesis of Newtonian droplets in non-Newtonian liquid is numerically studied and characterized in three…
This paper represents a theoretical and an experimental study of the spreading dynamics of a liquid droplet, generated by a needle free deposition system called the liquid needle droplet deposition technique. This technique utilizes a…