Related papers: A basic introduction to ultrastable optical caviti…
High-finesse microcavities offer a platform for compact, high-precision sensing by employing high-reflectivity, low-loss mirrors to create effective optical path lengths that are orders of magnitude larger than the device geometry. Here, we…
Fabry-Perot interferometers have been widely studied and used for well over a century. However, they have always been treated as stationary devices in the past. In this paper, we investigate the optical transmission of a longitudinally…
We present a transportable ultra-stable clock laser system based on a Fabry-P\'erot cavity with crystalline Al$_{0.92}$Ga$_{0.08}$As/GaAs mirror coatings, fused silica (FS) mirror substrates and a 20~cm-long ultra-low expansion…
We perform a theoretical study of a continuous superradiant laser supporting its experimental realization at FEMTO-ST using two sequentially-emitting ensembles of ${}^{171}\mathrm{Yb}$ atoms coupled to the same Fabry-Perot cavity. Using an…
We report the relative frequency stabilization of a distributed feedback erbium-doped fiber laser on an optical cavity by serrodyne frequency shifting. A correction bandwidth of 2.3 MHz and a dynamic range of 220 MHz are achieved, which…
A steady-state superradiant laser can be used to generate ultranarrow-linewidth light, and thus has important applications in the fields of quantum information and precision metrology. However, the light produced by such a laser is still…
State-of-the-art optical oscillators based on lasers frequency stabilized to high finesse optical cavities are limited by thermal noise that causes fluctuations of the cavity length. Thermal noise represents a fundamental limit to the…
We present a simple feedback description of parametric instabilities which can be applied to a variety of optical systems. Parametric instabilities are of particular interest to the field of gravitational-wave interferometry where high…
The repetition rate stabilization of an optical frequency comb based on diode-pumped solid-state laser technology is demonstrated using an intra-cavity electro-optic modulator. The large feedback bandwidth of such modulators allows…
A fiber laser is stabilized using a Calcium Fluoride (CaF2) whispering-gallery-mode resonator. It is set up using a semiconductor optical amplifier as a gain medium. The resonator is critically coupled through prisms, and used as a…
We demonstrate thermal-noise-limited direct locking of a semiconductor distributed feedback (DFB) laser to a sub-1 mL volume, ultrastable optical cavity, enabling extremely compact and simple ultrastable laser systems. Using the…
The SI unit of pressure, i.e. Pascal is realized with mechanical devices such as ultrasonic interferometer manometers and pressure balances for the pressure range 1 Pa to 100 kPa. Recently, optical interferometer manometers are being used…
We develop a light-matter interface enabling strong and uniform coupling between a chain of cold atoms and photons of an optical cavity. This interface is a fiber Fabry-Perot cavity, doubly resonant for both the wavelength of the atomic…
The control of light transmission through a Fabry-Perot cavity containing atoms is theoretically investigated, when the cavity mode beam and an intersecting control beam are both close to specific atomic resonances. A four-level atomic…
We have implemented highly stable and tunable frequency references using optical high finesse cavities which incorporate a piezo actuator. As piezo material we used ceramic PZT, crystalline quartz, or PZN-PT single crystals. Lasers locked…
We report on a device to electronically stabilize the optical injection lock of a semiconductor diode laser. Our technique uses as discriminator the peak height of the laser's transmission signal on a scanning Fabry-Perot cavity and feeds…
We describe the short-term frequency stability characterization of external-cavity diode lasers stabilized onto the 6S$_{1/2}$-7P$_{1/2}$ transition of Cs atom at 459 nm, using a microfabricated vapor cell. The laser beatnote between two…
One way of optically monitoring molecule concentrations is to utilise the high sensitivity of the transmission and reflection rates of Fabry-Perot cavities to changes of their optical properties. Up to now, intrinsic and extrinsic…
Fiber Fabry--Perot (FFP) resonators of a few centimeters are optimized as a function of the reflectivity of the mirrors and the dimensions of the intra-cavity waveguide. Loaded quality factor in excess of 10^9, with an optimum of…
Optical cavities are a cornerstone of photonics. They are indispensable in lasers, optical filters, optical combs and clocks, in quantum physics, and have enabled the detection of gravitational waves. Cavities transmit light only at…