Related papers: Ni cluster embedded (111)NiO layers grown on (0001…
(111)NiO epitaxial films are grown on c-sapphire substrates at various growth temperatures ranging from room-temperature to 600C using pulsed laser deposition (PLD) technique. Two series of samples, where different laser fluences are used…
(111)NiO epitaxial layers are grown on c-sapphire substrates by pulsed laser deposition (PLD) technique. Structural and morphological properties of the films are studied using in-plane as well as out-of-plane high resolution X-ray…
NiO/ZnO heterostructures are grown on c-sapphire substrates using pulsed laser deposition (PLD) technique. X-ray diffraction study shows that the ZnO layer epitaxially grows along [0001]-direction on (0001)sapphire surface as expected.…
High–quality epitaxial YNixMn1-xO3 thin films have been successfully grown on SrTiO3 (100) (STO) by pulsed laser deposition. X-ray diffraction studies showed that the films deposited on STO are fully c-axis oriented and exhibit…
Submonolayers of nickel oxide films were grown on an Ag(001) by pulsed laser deposition, and characterized in-situ by both scanning tunneling microscopy and X-ray photoelectron spectroscopy. We observed quasi-two-dimensional growth of the…
We have grown (111)- and (001)-oriented NiO thin films on (0001)-Sapphire and (001)-MgO substrates using pulsed laser deposition (PLD), respectively. DC magnetic susceptibility measurements underline that the N\'eel temperatures of the…
Single-phase Ni0.46Mn0.54As films with strained C1b symmetry have been successfully grown on GaAs (001) substrates by molecular-beam epitaxy. The epitaxial relationship between the film and the substrate has been studied using synchrotron…
Films of (111)-textured Cu, Ni, and Cu$_x$Ni$_y$ were evaluated as substrates for chemical vapor deposition of graphene. A metal thickness of 400 nm to 700 nm was sputtered onto a substrate of $\alpha-$Al$_2$O$_3$(0001) at temperatures of…
Soft ferromagnetic NiFe thin films are promising for applications in spintronic devices because of their constituent electrical and magnetic properties. Electron beam evaporation and sputtering techniques have been used to deposit NiFe thin…
Here we report the evolution of Ni stress in electroplated Ni films and investigate its origins as a function of electroplating time. First, low stress 200-nm-thick Ti / 200-nm thick Ni seed layers are deposited onto Si (100) wafers via…
Epitaxial films have the potential to be used as model systems for fundamental investigations on the martensitic transformation in binary NiTi. In this paper, we discuss growth of binary NiTi thin films on single crystalline MgO substrates.…
We report the successful fabrication of superconducting tantalum nitride (TaN) thin films using a pulsed laser deposition technique with 1064 nm radiation. Films with thickness $ \sim $ 100 nm deposited on MgO (100) single crystals and on…
The effects of substrate treatment, temperature and composition on the surface morphology of Ni-Cr thin films grown on MgO(001) are studied by scanning tunneling microscopy (STM) and atomic force microscopy (AFM). A combination of…
Pulsed laser deposition from a Nd:YAG laser was employed in production of hundreds of nanometer thick quasicrystalline Ti-Zr-Ni films on glass substrate. The influence of deposition temperature Ts on the structure, morphology and…
Here we systematically explore the use of pulsed laser deposition technique (PLD) to grow three basic oxides that have rocksalt structure but different chemical stability in the ambient atmosphere: NiO (stable), MnO (metastable) and EuO…
A cluster deposition method was used to produce films of loosely aggregated nanoclusters (NC) of Fe core-Fe3O4 shell or fully oxidized Fe3O4. Films of these NC on Si(100) or MgO(100)/Fe3O4(100) were irradiated to 10^16 Si2+/cm2 near room…
The growth of NiO on GaN(00.1) substrates by plasma-assisted molecular beam epitaxy under oxygen rich conditions was investigated at growth temperatures between 100 $^{\circ}$C and 850 $^{\circ}$C. Epitaxial growth of NiO(111) with two…
NiO layers were grown on MgO(100), MgO(110), and MgO(111) substrates by plasma-assisted molecular beam epitaxy under Ni-flux limited growth conditions. Single crystalline growth with a cube-on-cube epitaxial relationship was confirmed by…
We report on the structural and magnetic properties of thin Ge(1-x)Mn(x)films grown by molecular beam epitaxy (MBE) on Ge(001) substrates at temperatures (Tg) ranging from 80deg C to 200deg C, with average Mn contents between 1 % and 11 %.…
High quality ZnO thin films were gown using the pulsed laser deposition technique on (0001) Al$_2$O$_3$ substrates in an oxidizing atmosphere, using a Zn metallic target. We varied the growth conditions such as the deposition temperature…