Related papers: Superconducting TSV contact for cryoelectronic dev…
Vanadium silicide (V$_3$Si) is a promising superconductor for integration with silicon-based electronics, however the interfacial growth kinetics have a strong influence on the resulting superconducting properties and are not yet fully…
The experimental investigation of the $I_c(B)$--$T_c(B)$ phase boundary of superconducting niobium films with large area quasihexagonal hole arrays is reported. The hole arrays were patterned with microsphere photolithography. We…
The electrical characteristics of a point section of niobium oxide between a massive cathode made of a superconducting indium-tin alloy and a niobium film before the oxide breakdown and the nanocontact that appears after the breakdown of…
The results of dc, microwave and magnetic measurements of YBCO bicrystal junctions on r-cut sapphire are presented. The junctions with high resistance 10-20 W and IcRN= 1-2 mV and tolerance of RNS around 30% on chip allow to create…
We report the fabrication of strongly coupled nanohybrid superconducting junctions using PbS semiconductor nanowires and Pb0.5In0.5 superconducting electrodes. The maximum supercurrent in the junction reaches up to ~15 \mu A at 0.3 K, which…
High and medium-entropy superconductors with significant intrinsic disorder are a fascinating class of superconductors. Their combination of robust structural integrity, superior mechanical properties, and exceptional irradiation tolerance…
Understanding the origins of power loss in superconducting interconnects is essential for the energy efficiency and scalability of superconducting digital logic. At microwave frequencies, power dissipates in both the dielectrics and…
Structural and superconducting properties of high quality Niobium nanofilms with different thicknesses are investigated on silicon oxide and sapphire substrates. The role played by the different substrates and the superconducting properties…
We present a structure and a fabrication method for superconducting tunnel junctions down to the dimensions of 200 nm using i-line UV lithography. The key element is a side-wall-passivating spacer structure (SWAPS) which is shaped for…
The niobium rich selenide compound Nb5Se4 was synthesized at ambient pressure by high-temperature solid-state reaction in a sealed Ta tube. Resistivity and heat capacity measurements reveal that this compound is superconducting, with a T_c…
Continued advances in superconducting qubit performance require more detailed understandings of the many sources of decoherence. Within these devices, two-level systems arise due to defects, interfaces, and grain boundaries, and are thought…
We describe a microfabrication process for superconducting through-silicon vias appropriate for use in superconducting qubit quantum processors. With a sloped-wall via geometry, we can use non-conformal metal deposition methods such as…
Single atom junctions between superconducting niobium leads are produced using the Mechanically Controllable Break Junction technique. The current-voltage characteristics of these junctions are analysed using an exact formulation for a…
Electrical transport measurements were made on single-crystal Sn nanowires to understand the intrinsic dissipation mechanisms of a one-dimensional superconductor. While the resistance of wires of diameter larger than 70 nm drops…
Superconducting-proximity topological insulators (STIs) have garnered significant research attention over the past two decades. In this Letter, we demonstrate that a low-dimensional STI in the topological-nontrivial phase (TP) exhibits an…
Superconducting flip-chip interconnects are crucial for the three-dimensional integration of superconducting circuits in sensing and quantum technology applications. We demonstrate a simplified approach for a superconducting flip-chip…
Niobium nitride (NbN) is widely used in high-frequency superconducting electronics circuits because it has one of the highest superconducting transition temperatures ($T_c$ $\sim$ 16.5 K) and largest gap among conventional superconductors.…
Despite mounting evidence that materials imperfections are a major obstacle to practical applications of superconducting qubits, connections between microscopic material properties and qubit coherence are poorly understood. Here, we perform…
Niobium thin films on silicon substrate used in the fabrication of superconducting qubits have been characterized using scanning and transmission electron microscopy, electrical transport, magnetization, quasiparticle spectroscopy, and…
Superconductivity has been observed in doped SrTiO$_3$ at charge-carrier densities below 10$^{18}$ cm$^{-3}$, where the density of states at the Fermi level of the itinerant electrons is several orders of magnitude lower than that of…