Related papers: Giant conductance of PSS:PEDOT micro-surfaces indu…
The pursuit of green methodologies for fabricating optoelectronic devices necessitates the adoption of self-assembly-based strategies to engineer efficient and sustainable platforms. Microbubble lithography (MBL) stands out as a directed…
"Secondary doping" in poly(3,4-ethylenedioxy-thiophene):poly(styrenesulfonate) (PEDOT:PSS) is quite effective and a frequently used method for the conductivity enhancement. This simple approach, the addition of co-solvents to the PEDOT:PSS…
Poly(3,4-ethylenedioxythiophene) : poly(styrene sulfonic acid (PEDOT:PSS), an optically transparent organic semi-conductor, constitutes a suspension of conducting PEDOT:PSS grains, shelled by an insulating layer of PSS. While a percolation…
The conductivity and stability of specially treated PEDOT:PSS thin films are investigated. Based on the proposed treatment method, ITO-free PTB7:PC71BM organic solar cells are fabricated and the electrical properties of the cells are…
Adhesion control at the interface of two surfaces is crucial in many applications. Examples are the design of micro and nanodevices such as microfuidics devices, biochips, and electronic sensors. Adhesion at the interface of two materials…
Identifying and removing microplastics (MPs) from the environment is a global challenge. This study explores how the colloidal fraction of common MPs behave at aqueous interfaces of liquid crystal (LC) films. We observed polyethylene (PE)…
In this study, we fabricate 5-30-nm-thick films of FeSe/STO using pulsed laser deposition (PLD). The grown films exhibit superconductivity with an onset $T_{\mathrm{c}}$ that is much higher than that of bulk FeSe under ambient pressure. The…
Using electrically detected magnetic resonance spectroscopy, we demonstrate that doping the conducting polymer poly(3,4-ethylenedioxythiophene):poly(styrene-sulfonate) (PEDOT:PSS) with ethylene glycol allows for the control of effective…
The next generation of soft electronics will expand to the third dimension. This will require the integration of mechanically-compliant three-dimensional functional structures with stretchable materials. This study demonstrates…
We have performed resistivity measurements of poly[3,4-ethylenedioxythiophene]: poly[styrenesulfonate] (PEDOT:PSS) films with varying concentrations of glycerol. Resistivity is seen to decrease exponentially from roughly 3 ohm-cm for pure…
Flexible microfluidics have found extensive utility in the biological and biomedical fields. A leading substrate material for compliant devices is polydimethylsiloxane (PDMS). Despite its many advantages, PDMS is inherently hydrophobic and…
In order to increase the bone forming ability of MBG-PCL composite scaffold, microporosity was created in the struts of 3D-printed MBG-PCL scaffolds for the manufacturing of a construct with a multiscale porosity consisting of meso-, micro-…
Fabrication techniques such as laser patterning offer excellent potential for low cost and large area device fabrication. Conductive polymers can be used to replace expensive metallic inks such as silver and gold nanoparticles for printing…
We focused on polydimethylsiloxane (PDMS) as a substrate for replication, micropatterning, and construction of biologically active surfaces. The novelty of this study is based on the combina-tion of argon plasma exposure of micropatterned…
We present an investigation of the role of micropatterning on adhesion properties at soft deformable polydimethylsiloxane (PDMS)/ acrylic adhesive interfaces. Contrary to what has been observed for low aspect ratio rigid patterns, where the…
Adhesion control at the interface of two surfaces is crucial in various applications, including the design of micro- and nanodevices such as microfluidic devices, triboelectric nanogenerators, biochips, and electronic sensors. Several…
Switchable and active metasurfaces allow for the realization of beam steering, zoomable metalenses, or dynamic holography. To achieve this goal, one has to combine high-performance metasurfaces with switchable materials that exhibit high…
In a microfluidic environment, the presence of bubbles is often detrimental to the functionality of the device, leading to clogging or cavitation, but microbubbles can also be an indispensable asset in other applications such as…
The correlation between the transport properties and structural degrees of freedom of conducting polymers is a central concern in both practical applications and scientific research. In this study, we demonstrated the existence of…
Hydrogen resist lithography using the tip of a scanning tunneling microscope (STM) is employed for patterning p-type nanostructures in silicon. For this, the carrier density and mobility of boron $\delta$-layers, fabricated by gas-phase…