Related papers: Rechargeable Li/Cl$_2$ battery down to -80 {\deg}C
In this paper, Al-Cu-Fe quasicrystal alloy was used as anode material of lithium-ion batteries. The first specific discharge capacity of quasicrystal was 204mAh/g. Cyclic voltammetry showed that oxidation peak of Al-Cu-Fe quasicrystal was…
Lithium metal batteries (LMBs), when coupled with a localized high-concentration electrolyte and a high-voltage nickel-rich cathode, offer a solution to the increasing demand for high energy density and long cycle life. However, the…
The frontiers of quantum electronics have been linked to the discovery of new refrigeration methods since the discovery of superconductivity at a temperature around $4\,$K, enabled by the liquefaction of helium. Since then, the advances in…
Natural abundance, impressive chemical characteristics and economic feasibility have rekindled the appeal for rechargeable sodium (Na) batteries as a practical solution for the growing energy demand, environmental sustainability and energy…
We demonstrate that for polycrystalline LiNi0.33Mn0.33Co0.33O2 c-axis textured thin film cathodes of rechargeable lithium-ion batteries, the kinetics of Li storage and release including maximum specific capacity is determined by Li…
It has been shown recently that the overpotential originating from ionic conduction of alkali-ions through the inner dense solid-electrolyte interphase (SEI) is strongly non-linear. An empirical equation was proposed to merge the measured…
Estimating the temperature distribution within Li-ion batteries during operation is critical for safety and control purposes. Although existing control-oriented thermal models - such as thermal equivalent circuits (TEC) - are…
We report the cooling of electrons in nanoelectronic Coulomb blockade thermometers below 4 mK. Above 7 mK the devices are in good thermal contact with the environment, well isolated from electrical noise, and not susceptible to…
The lithium (Li) metal anode is essential for next generation high energy density rechargeable Li metal batteries. Although extensive studies have been performed to prolong the cycle life of Li metal batteries, the calendar life, which…
Li-CO$_2$ batteries are promising energy storage systems due to their high theoretical energy density and CO$_2$ fixation capability, relying on reversible Li$_2$CO$_3$/C formation during discharge/charge cycles. We present a multiscale…
We present a structural and magnetic study on two batches of polycrystalline LiNi$_{0.8}$Mn$_{0.1}$Co$_{0.1}$O$_2$ (commonly known as Li NMC 811), a Ni-rich Li ion battery cathode material, using elemental analysis, X-ray and neutron…
Potassium-ion ($\rm K$-ion) rechargeable batteries; considered to be lucrative low-cost battery options for large-scale and capacious energy storage systems, have been garnering tremendous attention in recent years. However, due to the…
In resent years ANN is widely reported for modeling in different areas of science including electro chemistry. This includes modeling of different technological batteries such as lead acid battery, Nickel cadmium batteries etc. Lithium ion…
All-solid-state lithium batteries (ASSLB) have been regarded as the most promising candidate to achieve the next generation energy storage with high energy and high safety. However, some bottlenecks, including high interfacial resistance,…
We prepared Na$_x$TO$_2$ (T = Mn, Co) nanostructures to use as cathode material in Na-ion batteries. The Rietveld refinement of x-ray diffraction data confirms the hexagonal symmetry. Scanning and transmission electron microscopy…
In this article we investigate a model for the temperature within a Lithium-Ion battery. The model takes the form of a parabolic PDE for the temperature coupled with two elliptic PDE's for the electric potential within the solid and…
We have investigated the possibility of using aluminum functionalized silicene trilayers (ABC-Si$_4$Al$_2$) as an anode material for alkali metal ion batteries (AMIBs). First, we studied the thermodynamic stability of ABC-Si$_4$Al$_2$ using…
The thermophotovoltaic cells which convert the low temperature radiation into electricity are of significance due to their potential applications in many fields. In this work, Bi2Te3/Si thermophotovoltaic cells which work under the…
A Li-conversion alpha-Fe2O3@C nanocomposite anode and a high-voltage LiNi0.5Mn1.5O4 cathode are synthesized in parallel, characterized, and combined in a Li-ion battery. alpha-Fe2O3@C is prepared via annealing of maghemite iron oxide and…
We report a neutral salt water based battery which uses p-type and n-type solution processed polymer films as the cathode and the anode of the cell. The specific capacity of the electrodes (approximately 30 mAh cm-3) is achieved via…