Related papers: Recent advances in metallographic polishing for SR…
We propose cost-effective production of medium grain (MG) niobium (Nb) discs directly sliced from forged and annealed billet. This production method provides clean surface conditions and reliable mechanical characteristics with…
A DC cylindrical magnetron sputtering system has been commissioned and operated to deposit Nb3Sn onto 2.6 GHz Nb SRF cavities. After optimizing the deposition conditions in a mock-up cavity, Nb-Sn films are deposited first on flat samples…
High-speed polarization management is highly desirable for many applications, such as remote sensing, telecommunication, and medical diagnosis. However, most of the approaches for polarization management rely on bulky optical components…
Time of Flight Secondary Ion Mass Spectroscopy, X-Ray Photoelectron Spectroscopy, in situ Photo-Current Spectroscopy and electrochemical analysis were combined to characterize the physicochemical alterations induced by electrochemical…
A deeply modulated, regular, continuous, oscillating current waveform is reliably and repeatably achieved during electropolishing of niobium single-cell elliptical radiofrequency cavities. Details of the technique and cavity test results…
Many applications require charge neutralisation of isolated test bodies and this has been successfully done using photoelectric emission from surfaces which are electrically benign(gold) or superconducting (niobium). Gold surfaces nominally…
Clean materials are required to construct and operate many low-background physics experiments. High-purity copper has found broad use because of its physical properties and availability. In this paper, we describe methods to assay and…
Metal halide perovskites (MHPs) have become a promising candidate in a myriad of applications, such as light-emitting diodes, solar cells, lasing, photodetectors, photocatalysis, transistors, etc. This is related to the synergy of their…
High-speed Pockels modulation and second-order nonlinearities are key components in optical systems, but CMOS-compatible platforms like silicon and silicon nitride lack these capabilities. Micro-transfer printing of thin-film lithium…
This paper reports a few-layer black phosphorus thickness pattern fabricated by a top-down nanofabrication approach. This was achieved by a new wet etching process that can etch selected regions of few-layer black phosphorus with an atomic…
Using oxide substrates for functional ceramic thin film deposition beyond their usual application as chemical inert, lattice-matched support for the films represents a novel concept in ceramic thin film research. The substrates are applied…
This Review highlights the exciting advancements in the science of honeycomb layered frameworks with metallophilic bilayers that have recently garnered attention particularly due to reports of anomalous fractional valency states of silver…
Upcoming projects requiring high-Q ~650 MHz medium-to-high-${\beta}$ elliptical cavities drive a need to understand magnetic RF loss mechanisms and mitigations in greater detail. High-temperature annealing and fast-cooldowns have proven…
Silica nanoparticles have emerged as key building blocks for advanced applications in electronics, catalysis, energy storage, biomedicine, and environmental science. In this review, we focus on recent developments in both the synthesis and…
The augmented space formalism coupled with the recursion method and a tight-binding linear Muffin-tin orbitals basis has been applied to study the effects of roughness on the properties of (001) surfaces of body-centered cubic Fe and…
The objective of this work was to study the RF sputtering process parameters optimisation for deposition of Silicon Nitride thin films. The process parameters chosen to be varied were deposition power, deposition duration, flow rate of…
Transmission electron beams (TEBs) have long been used to study and manipulate materials at nanometer scales. In the late 1970's, Cherns demonstrated surface pitting in Au films upon exposure to a 1MeV TEB and observed crystal dislocations…
Short-range surface plasmon polaritons (SR-SPPs) can arise due to the hybridization of surface plasmon polaritons propagating along the two interfaces of a thin metal slab. In optics, they have gained particular interest for imaging and…
SRF cavities for particle acceleration are conventionally operated immersed in a bath of liquid helium at 4.2 K and below. Although this cooling configuration is practically and economically viable for large scientific accelerator…
The desire for higher sensitivity has driven ground-based cosmic microwave background (CMB) experiments to employ ever larger focal planes, which in turn require larger reimaging optics. Practical limits to the maximum size of these optics…