Related papers: Composition variations in Cu(In,Ga)(S,Se)2 solar c…
Reducing the thickness of Cu(In,Ga)Se2 solar cells is a key objective in order to reduce production cost and to improve sustainability. The major challenge for sub-micron Cu(In,Ga)Se2 cells is the recombination at the backside. In standard…
Alloying small quantities of silver into Cu(In,Ga)Se2 was shown to improve the efficiency for wide and low band gap solar cells. We study low band gap industrial Cu(In,Ga)(S,Se)2 absorbers, substituting less than 10% of the copper with…
Thin-film solar cells reach high efficiencies and have a low carbon footprint in production. Tandem solar cells have the potential to significantly increase the efficiency of this technology, where the bottom-cell is generally composed of a…
Organic-inorganic halide perovskite materials have emerged as attractive alternatives to conventional solar cell building blocks. Their high light absorption coefficients and long diffusion lengths suggest high power conversion efficiencies…
Sulfide chalcopyrite Cu(In,Ga)S2 (CIGS) is a wide bandgap semiconductor suitable for the top cell of a tandem solar device. Here we demonstrate significant improvements in absorber quality by alloying with Ag to form (Ag,Cu)(In,Ga)S2…
Tandem solar cells can better harness the energy of the solar spectrum. Chalcopyrite solar cells have drawn attention, being the only highly efficient devices with bandgap around 1.0 eV, suitable for bottom cells. In the quest for better…
Chalcopyrite semiconductors are of considerable interest for application as absorber layers in thin-film photovoltaic cells. When growing films of these compounds, however, they are often found to contain CuAu- like domains, a metastable…
Wide-gap Cu(In,Ga)S2 solar cells with In2O3:Sn (ITO) as transparent back contact are evaluated for the application as top cells in tandem devices. The effect of Na on the solar cell performance is investigated by supplying additional Na by…
Sulphurization processes in Cu(In,Ga)Se$_2$ thin-film solar cells has been intensively studied in the last decade as a viable alternative to the existing Ga-grading. The main advantage of using S grading is that by substituting Se with S we…
We present direct measurements of depth-resolved band gap variations of CuIn(1-x)Ga(x)Se2 thin-film solar cell absorbers. A new measurement technique combining parallel measurements of local thin-film interference and spectral…
Influence of composition and external hydrostatic pressure on the structural, electronic, and optical properties of the CuGa1-xAlxS2 (x=0, 0.25, 0.5, 0.75, 1.0) chalcopyrite semiconductor was analyzed by means of the first-principles…
New generation Indium based lead-free Cs2InAgCl6 is a promising halide material in photovoltaic applications due to its good air stability and non-toxic behavior. But its wide band gap (>3 eV) is not suitable for solar spectrum and hence…
An optoelectronic optimization was carried out for an AlGaAs solar cell containing (i) an n-AlGaAs absorber layer with a graded bandgap and (ii) a periodically corrugated Ag backreflector combined with localized ohmic Pd-Ge-Au backcontacts.…
The radiative open circuit voltage loss in a solar cell occurs because the absorptance spectrum near the band gap shows gradual increase rather than sharp step function like transition. This broadening effect has been attributed to band gap…
Interface recombination at the absorber buffer interface impedes the efficiency of a solar cell with an otherwise excellent absorber. The internal voltage or the quasi-Fermi level splitting (qFLs) measures the quality of the absorber.…
Sulfide chalcopyrite, Cu(In,Ga)S2, having wide bandgap (larger than 1.5 eV), favorable optoelectronic properties, and high stability, is a promising top-cell absorber for tandem applications. Adapting device structures optimized for 1.0 -…
All-perovskite tandem solar cells with narrow and wide bandgap perovskite absorbers are promising candidates for low-cost and high efficiency photovoltaic applications. However, the open circuit voltage of typical tandem structures is…
Traditional CdS buffer layer in selenium-free Cu(In,Ga)S2 solar cells leads to reduced open-circuit voltage because of a negative conduction band offset at the Cu(In,Ga)S2/CdS interface. Reducing this loss necessitates the substitution of…
The lead-free double perovskite material (viz. Cs$_2$AgBiCl$_6$) has emerged as an efficient and environmentally friendly alternative to lead halide perovskites. To make Cs$_2$AgBiCl$_6$ optically active in the visible region of solar…
A high theoretical efficiency of 47.2% was achieved by a novel combination of In0.51Ga0.49P, GaAs, In0.24Ga0.76As and In0.19Ga0.81Sb subcell layers in a simulated quadruple junction solar cell under 1 sun concentration. The electronic…