Related papers: Mid-infrared wide-field nanoscopy
Vibrational sum- and difference-frequency generation (SFG and DFG) spectroscopy probes the nonlinear response of interfaces at mid-infrared (MIR) wavelengths while detecting upconverted signals in the visible. Recent work has moved from…
Stimulated Raman scattering (SRS) microscopy is a highly sensitive chemical imaging technique. However, the broader application of SRS has been limited by two key challenges: the reliance on low-noise but bulky solid-state laser sources and…
High-resolution infrared imagers are currently more expensive than CMOS and CCD cameras, due to costly sensor arrays. Van der Waals (vdWs) materials present an opportunity for low-cost, room temperature infrared photodetectors. Although…
A new method for high-sensitivity subwavelength spectromicroscopy is proposed based on the usage of a spaser (near-field laser) in the form of a scanning probe microscope tip. The high spatial resolution is defined by the tip's curvature,…
High resolution mid-infrared (MIR) images of the central region of NGC1068 have been obtained with VISIR, the multi-mode MIR instrument recently installed at the ESO/VLT on Paranal. A map of the emission at 12.8mic with increased…
Multi-image super-resolution (MISR) allows to increase the spatial resolution of a low-resolution (LR) acquisition by combining multiple images carrying complementary information in the form of sub-pixel offsets in the scene sampling, and…
Mid infrared (MIR) photonics is a key region for molecular physics [1]. High-resolution spectroscopy in the 1--10 {\mu}m region, though, has never been fully tackled for the lack of widely-tunable and practical light sources. Indeed, all…
Compared to imaging in the visible and near-infrared regions below 900 nm, imaging in the second near-infrared window (NIR-II, 1000-1700 nm) is a promising method for deep-tissue high-resolution optical imaging in vivo mainly due to the…
Far-field characterization of small objects is severely constrained by the diffraction limit. Existing tools achieving sub-diffraction resolution often utilize point-by-point image reconstruction via scanning or labelling. Here, we present…
Shortwave-infrared(SWIR) spectral information, ranging from 1 {\mu}m to 2.5{\mu}m, overcomes the limitations of traditional color cameras in acquiring scene information. However, conventional SWIR hyperspectral imaging systems face…
Quantitative phase imaging (QPI) has been widely applied in characterizing cells and tissues. Spatial light interference microscopy (SLIM) is a highly sensitive QPI method, due to its partially coherent illumination and common path…
We experimentally demonstrate long-wave infrared-visible sum-frequency generation microscopy for imaging polaritonic resonances of infrared (IR) nanophotonic structures. This nonlinear-optical approach provides direct access to the resonant…
In vivo real-time epifluorescence imaging of mouse hindlimb vasculatures in the second near-infrared region (NIR-II, 1.1~1.4 microns) is performed using single-walled carbon nanotubes (SWNTs) as fluorophores. Both high spatial resolution…
MIDIR is the proposed thermal/mid-IR imager and spectrograph for the European Extremely Large Telescope (E-ELT). It will cover the wavelength range of 3 to at least 20 microns. Designed for diffraction-limited performance over the entire…
Fast and accurate detection of light in the near-infrared (NIR) spectral range plays a crucial role in modern society, from alleviating speed and capacity bottlenecks in optical communications to enhancing the control and safety of…
A new far-field optical microscopy technique capable of reaching nanometer-scale resolution has been developed recently using the in-plane image magnification by surface plasmon polaritons. This microscopy is based on the optical properties…
Long-range imaging in the thermal infrared band is critical for applications such as environmental monitoring, industrial inspections, and surveillance. To achieve high quality imaging, these systems typically require large apertures and…
Spectral measurements in the infrared (IR) optical range provide unique fingerprints of materials which are useful for material analysis, environmental sensing, and health diagnostics. Current IR spectroscopy techniques require the use of…
IRIS is a near-infrared (0.84 to 2.4 microns) integral field spectrograph and wide-field imager being developed for first light with the Thirty Meter (TMT). It mounts to the advanced optics (AO) system NFIRAOS and has integrated…
The development of advanced diagnostic systems to measure and optimize emerging energetic material performance is critical for the defeat of Chemical Warfare Agents (CWA). This study presents an integrated multi-spectroscopic approach to…