Related papers: Niobium Quantum Interference Microwave Circuits wi…
We present the driven response at T=30mK of 6 GHz superconducting resonators constructed from capacitively-shunted three dimensional (3D) aluminum nanobridge superconducting quantum interference devices (nanoSQUIDs). We observe flux…
Superconducting circuits with nonlinear elements such as Josephson tunnel junctions or kinetic inductance nanowires are the workhorse for microwave quantum and superconducting sensing technologies. For devices, which can be operated at high…
In this work, we present a numerical model specifically designed for 3D multilayer devices, with a focus on nanobridge junctions and coplanar waveguides. Unlike existing numerical models, ours does not approximate the physical layout or…
We report the realization of multilayer three-dimensional nanobridge Josephson junctions based on Nb/NbN and Nb/TiN superconducting stacks fabricated using electron-beam lithography and chlorine-based dry etching. In this architecture, a…
We present a method for fabricating Josephson junctions and superconducting quantum interference devices (SQUIDs) which is based on the local anodization of niobium strip lines 3 to 6.5 nm-thick under the voltage-biased tip of an Atomic…
The development of nonlinear and frequency-tunable superconducting microwave circuits for operation in large magnetic fields is of high relevance for hybrid quantum systems such as spin resonance spectrometers, microwave quantum magnonics,…
We present transport measurements of unshunted dc superconducting quantum interference devices (SQUIDs) consisting of 30 nm wide aluminum nanobridges of varying length L contacted with two and three dimensional banks. 3D nanobridge SQUIDs…
Niobium offers the benefit of increased operating temperatures and frequencies for Josephson junctions, which are the core component of superconducting devices. However existing niobium processes are limited by more complicated fabrication…
Hybrid superconducting--spin systems offer the potential to combine highly coherent atomic quantum systems with the scalability of superconducting circuits. To fully exploit this potential requires a high quality-factor microwave resonator,…
The recently discovered superconductor MgB2, with a transition temperature of 39K, has significant potential for future electronics. An essential step is the achievement of Josephson circuits, of which the superconducting quantum…
We have used a neon focused-ion-beam to fabricate both nanoscale Nb Dayem bridges and NbN phase-slip nanowires located at the short-circuited end of quarter-wavelength coplanar waveguide resonators. The Dayem bridge devices show…
Scaling up superconducting quantum processors requires a high routing density for readout and control lines, relying on low-loss interconnects to maintain design flexibility and device performance. We propose and demonstrate a universal…
We present a fabrication method of superconducting quantum interference devices (SQUIDs) based on direct write lithography with an Atomic Force Microscope (AFM). This technique involves maskless local anodization of Nb or NbN ultrathin…
Nanoscale electromechanical coupling provides a unique route towards control of mechanical motions and microwave fields in superconducting cavity electromechanical devices. Though their successes in utilizing the optomechanical or…
Here we present the microwave characterization of microstrip resonators made from aluminum and niobium inside a 3D microwave waveguide. In the low temperature, low power limit internal quality factors of up to one million were reached. We…
We present the design, realization and performance of a three-axis vector nano Superconducting QUantum Interference Device (nanoSQUID). It consists of three mutually orthogonal SQUID nanoloops that allow distinguishing the three components…
Superconducting circuit quantum electrodynamics experiments with propagating microwaves require devices acting as beam splitters. Using niobium thin films on silicon and sapphire substrates, we fabricated superconducting 180{\deg}…
Josephson tunnel junctions are widely used as nonlinear elements in superconducting circuits such as low noise amplifiers and quantum bits. However, microscopic defects in the oxide tunnel barrier can produce low and high frequency noise…
It was recently experimentally proved that the superconducting counterpart of a diode, i.e., a device that realizes nonreciprocal Cooper pairs transport, can be realized by breaking the spatial and time-reversal symmetry of a system…
Advancing large-scale quantum computing requires superconducting circuits that combine long coherence times with compatibility with semiconductor technology. We investigate niobium nitride (NbN) coplanar waveguide resonators integrated with…