Related papers: Rules of plastic strain-induced phase transformati…
Study of the plastic flow and strain-induced phase transformations (PTs) under high pressure with diamond anvils is important for material and geophysics. We introduce rough diamond anvils and apply them to Zr, which drastically change the…
Severe plastic deformations under high pressure are used to produce nanostructured materials but were studied ex-situ. We introduce rough diamond anvils to reach maximum friction equal to yield strength in shear and perform the first…
The first in situ quantitative synchrotron X-ray diffraction (XRD) study of plastic strain-induced phase transformation (PT) has been performed on $\alpha-\omega$ PT in ultra-pure, strongly plastically predeformed Zr as an example, under…
The first experiments in dynamic rotational diamond anvil cell (dRDAC) on severe plastic deformation (SPD) and BCC<->HCP phase transformation (PT) at pressure up to 27.6 GPa, rotation rates up to 1,500 RPM, and strain rates up to 2,094 /s…
Various phenomena (phase transformations, chemical reactions, and friction) under high pressures in diamond anvil cell are strongly affected by fields of all components of stress and plastic strain tensors. However, they could not be…
Plastic strain-induced phase transformations (PTs) and chemical reactions under high pressure are broadly spread in modern technologies, friction and wear, geophysics, and astrogeology. However, because of very heterogeneous fields of…
In situ studies under severe plastic deformation at high pressures, employing rotational/shear diamond anvil cells (RDAC), have recently gained much interest in the high-pressure community owing to their potential applications in material…
Deep-focus earthquakes that occur at 350-660 km are theorized to be caused by strain-induced olivine-spinel phase transformation (PT). We introduce and apply dynamic rotational diamond anvil cell with rough diamond anvils to deform San…
Processes involving severe plastic deformations (SPD) and phase transformations and chemical reactions (PTs/CRs) under high pressures are widespread for obtaining new nanostructured phases and their processing, mechanochemical synthesis,…
The first study of the effect of the initial microstructure on its evolution under hydrostatic compression before, during, and after the irreversible $\alpha\rightarrow\omega$ phase transformation and during pressure release in Zr using in…
Double stage diamond anvil cells (DAC) of two designs have been assembled and tested. We used a standard symmetric DAC as a primary stage and CVD microanvils machined by a focused ion beam - as a second. We evaluated pressure, stress, and…
Certain alumino-silicates display exotic properties enabled by their framework structure made of corner-sharing tetrahedral rigid units. Using \textit{in situ} diamond-anvil cell x-ray diffraction (XRD), we study the pressure-induced…
We present results from ramp compression experiments on high-purity Zr that show the $\alpha \rightarrow \omega$, $\omega \rightarrow \beta$, as well as reverse $\beta \rightarrow \omega$ phase transitions. Simulations with a multi-phase…
The transformation pathways of carbon at high pressures are of broad interest for synthesis of novel materials and for revealing the Earth's geological history. We have applied large plastic shear on graphite in rotational anvils to form…
Large-scale molecular dynamics simulations of shear deformation under constant pressures of amorphous silicon, PT from low-density-amorphous (LDA) to high-density-amorphous (HDA) Si, and formation of shear bands (SBs) are performed using…
Extreme pressures and temperatures create conditions that allow even hard and brittle materials to deform plastically. Despite extensive research, the upper limits of flow strength, the resistance to plastic flow, remain uncertain, and the…
Hydrostatic pressure applied using diamond anvil cells (DAC) has been widely explored to modulate physical properties of materials by tuning their lattice degree of freedom. Independently, electrical field is able to tune the electronic…
Few-layer $\alpha$-In$_2$Se$_3$ has been studied under pressure using Raman spectroscopy in a diamond anvil cell up to 60 GPa (at room temperature). A combination of AFM and Raman was used to estimate the thickness of the specimens. While…
The uniaxial compression design of the diamond anvil high pressure cell (DAC) necessitates the use of a soft pressure-transmitting medium (PTM) to minimize non-hydrostatic effects at significantly high pressures, and many such media are…
Zirconium (Zr) is an important engineering material with numerous practical applications. It undergoes martensitic $\alpha$ to $\omega$ phase transformation (PT) at pressures that vary from 0.67 GPa to 17 GPa under different loading…