Related papers: On Formulations for Modeling Pressurized Cracks Wi…
We present a continuum theory to describe elastically induced phase transitions between coherent solid phases. In the limit of vanishing elastic constants in one of the phases, the model can be used to describe fracture on the basis of the…
We present a phase field model (PFM) for simulating complex crack patterns including crack propagation, branching and coalescence in rock. The phase field model is implemented in COMSOL and is based on the strain decomposition for the…
In variational phase-field modeling of brittle fracture, the functional to be minimized is not convex, so that the necessary stationarity conditions of the functional may admit multiple solutions. The solution obtained in an actual…
We propose a full 3D benchmark problem for brittle fracture based on experiments as well as a validation in the context of phase-field models. The example consists of a series of four-point bending tests on graphite specimens with sharp…
We present a new theoretical and numerical framework for modelling mechanically-assisted corrosion in elastic-plastic solids. Both pitting and stress corrosion cracking (SCC) can be captured, as well as the pit-to-crack transition.…
Recently, the phase field method has been increasingly used for brittle fractures in soft materials like polymers, elastomers, and biological tissues. When considering finite deformations to account for the highly deformable nature of soft…
Crack initiation and propagation in elastic - perfectly plastic bodies is studied in a phase-field or variational gradient damage formulation. A rate-independent formulation that naturally couples elasticity, perfect plasticity and fracture…
We introduce a phenomenological continuum model for mode III dynamic fracture that is based on the phase-field methodology used extensively to model interfacial pattern formation. We couple a scalar field, which distinguishes between…
The phase-field model for fracture, despite its popularity and ease of implementation comes with its set of computational challenges. They are the non-convex energy functional, variational inequality due to fracture irreversibility, the…
We present a complete numerical analysis for a general discretization of a coupled flow-mechanics model in fractured porous media, considering single-phase flows and including frictionless contact at matrix-fracture interfaces, as well as…
We address brittle fracture in anisotropic materials featuring two-fold and four-fold symmetric fracture toughness. For these two classes, we develop two variational phase-field models based on the family of regularizations proposed by…
We present a new phase field framework for modelling fracture and fatigue in Shape Memory Alloys (SMAs). The constitutive model captures the superelastic behaviour of SMAs and damage is driven by the elastic and transformation strain energy…
Phase field theory for fracture is developed at large strains with an emphasis on a correct introduction of surface stresses. This is achieved by multiplying the cohesion and gradient energies by the local ratio of the crack surface areas…
Propagation of a fluid-driven crack in an impermeable linear elastic medium under axis-symmetric conditions is investigated in the present work. The fluid exerting the pressure inside the crack is an incompressible Newtonian one and its…
The description of surface-diffusion controlled dynamics via the phase-field method is less trivial than it appears at first sight. A seemingly straightforward approach from the literature is shown to fail to produce the correct…
We applied a hybrid-dimensional flow model to pressure transients recorded during pumping experiments conducted at the Reiche Zeche underground research laboratory to study the normal opening behavior of fractures due to fluid injection.…
We address in this review unified analysis of phase-field models for cohesive fracture. Aiming to regularize the Barenblatt (1959) cohesive zone model, all the discussed models are distinguished by three characteristic functions, i.e., the…
Fatigue fracture is one of the main causes of failure in structures. However, the simulation of fatigue crack growth is computationally demanding due to the large number of load cycles involved. Metals in the low cycle fatigue range often…
A phase field model for fluid-driven dynamic crack propagation in poroelastic media is proposed. Therefore, classical Biot poroelasticity theory is applied in the porous medium while arbitrary crack growth is naturally captured by the phase…
The shape of a crack front propagating through a thin sample is studied using a phase field model. The model is shown to have a well defined sharp interface limit. The crack front is found to be an ellipse with large axis the width of the…