Related papers: Concentric Tube Robot Redundancy Resolution via Ve…
A redundant manipulator has multiple inverse kinematics solutions per end-effector pose. Accordingly, there can be many trajectories for joints that follow a given endeffector path in the Cartesian space. In this paper, we present a…
As surgical interventions trend towards minimally invasive approaches, Concentric Tube Robots (CTRs) have been explored for various interventions such as brain, eye, fetoscopic, lung, cardiac and prostate surgeries. Arranged concentrically,…
A time-optimal problem for redundantly actuated robots moving on a specified path is a challenging problem. Although the problem is well explored and there are proposed solutions based on phase plane analysis, there are still several…
To economically deploy robotic manipulators the programming and execution of robot motions must be swift. To this end, we propose a novel, constraint-based method to intuitively specify sequential manipulation tasks and to compute…
Trajectory optimization methods have achieved an exceptional level of performance on real-world robots in recent years. These methods heavily rely on accurate analytical models of the dynamics, yet some aspects of the physical world can…
Concentric tube continuum robots utilize nested tubes, which are subject to a set of inequalities. Current approaches to account for inequalities rely on branching methods such as if-else statements. It can introduce discontinuities, may…
Concentric Tube Robots (CTRs) have been proposed to operate within the unstructured environment for minimally invasive surgeries. In this letter, we consider the operation scenario where the tubes travel inside the channels with a large…
Collaborative robots should ideally use low torque actuators for passive safety reasons. However, some applications require these collaborative robots to reach deep into confined spaces while assisting a human operator in physically…
This paper proposes an active model-based fault and failure tolerant control scheme for a class of marine vehicles with thruster redundancy. Unlike widely used state and parameter estimation methods, where the estimation errors are utilized…
This paper presents redundancy resolution and disturbance rejection via torque optimization in Hybrid Cable-Driven Robots (HCDRs). To begin with, we initiate a redundant HCDR for nonlinear whole-body system modeling and model reduction.…
The paper focuses on the redundancy resolution in kinematic control of a new type of serial manipulator composed of multiple tensegrity segments, which are moving in a multi-obstacle environment. The general problem is decomposed into two…
Optimal behaviours of a system to perform a specific task can be achieved by leveraging the coupling between trajectory optimization, stabilization, and design optimization. This approach is particularly advantageous for underactuated…
Robust tensor completion (RTC) aims to recover a low-rank tensor from its incomplete observation with outlier corruption. The recently proposed tensor ring (TR) model has demonstrated superiority in solving the RTC problem. However, the…
We propose a higher-order dimensionality reduction framework based on the Trace Ratio (TR) optimization problem. We establish conditions for existence and uniqueness of solutions and clarify the theoretical connection between the Trace…
In this work, we present an approach to minimizing the time necessary for the end-effector of a redundant robot manipulator to traverse a Cartesian path by optimizing the trajectory of its joints. Each joint has limits in the ranges of…
The performance of robots in high-level tasks depends on the quality of their lower-level controller, which requires fine-tuning. However, the intrinsically nonlinear dynamics and controllers make tuning a challenging task when it is done…
We present a novel method for optimizing the posture of kinematically redundant torque-controlled robots to improve robustness during impacts. A rigid impact model is used as the basis for a configuration-dependent metric that quantifies…
Purpose: Vision-based robot tool segmentation plays a fundamental role in surgical robots and downstream tasks. CaRTS, based on a complementary causal model, has shown promising performance in unseen counterfactual surgical environments in…
Trajectory generation in confined environment is crucial for wide adoption of intelligent robot manipulators. In this paper, we propose a novel motion planning approach for redundant robot arms that uses a hybrid optimization framework to…
Tendon-actuated concentric tube mechanisms combine the advantages of tendon-driven continuum robots and concentric tube robots while addressing their respective limitations. They overcome the restricted degrees of freedom often seen in…