Related papers: Kinematic Analysis and Design of a Novel (6+3)-DoF…
The objective of this work is to design a mechatronic bipedal robot with mobility in 3D environments. The designed robot has a total of six actuated degrees of freedom (DoF), each leg has two DoF located at the hip: one for…
Parallel robots are capable of high-speed manipulation and have become essential tools in the industry. The proximal placement of their motors and the low weight of their end effectors make them ideal for generating highly dynamic motion.…
Parallel kinematic mechanisms are interesting alternative designs for machining applications. Three 2-DOF parallel mechanism architectures dedicated to machining applications are studied in this paper. The three mechanisms have two constant…
This paper presents a 3-DOF hopping robot with a human-like lower-limb joint configuration and a flat foot, capable of performing dynamic and repetitive jumping motions. To achieve both high torque output and a large hollow shaft diameter…
This paper presents the kinematic analysis of the 3-PPPS parallel robot with an equilateral mobile platform and a U-shape base. The proposed design and appropriate selection of parameters allow to formulate simpler direct and inverse…
This paper presents three feedback controllers that achieve an asymptotically stable, periodic, and fast walking gait for a 3D (spatial) bipedal robot consisting of a torso, two legs, and passive (unactuated) point feet. The contact between…
This paper presents the mechatronic design, dynamic modeling, and experimental validation of a three-degree-of-freedom (3-DOF) micro parallel robot featuring a prismatic-spherical (3PS) topology actuated by three Hydraulically Amplified…
A multi-joint enabled robot requires extensive mathematical calculations to determine the end effector's position with respect to the other connective joints involved and their corresponding frames in a specific coordinate system. If a…
The paper addresses kinematic and geometrical aspects of the Orthoglide, a three-DOF parallel mechanism. This machine consists of three fixed linear joints, which are mounted orthogonally, three identical legs and a mobile platform, which…
Through the implementation of reconfigurability to achieve flexibility and adaptation to tasks by morphology changes rather than by increasing the number of joints, malleable robots present advantages over traditional serial robot arms in…
The paper derives the inverse and the forward kinematic equations of a serial - parallel 5-axis machine tool: the VERNE machine. This machine is composed of a three-degree-of-freedom (DOF) parallel module and a two-DOF serial tilting table.…
Model-based control usually relies on an accurate model, which is often obtained from CAD and actuator models. The more accurate the model the better the control performance. However, in bipedal robots that demonstrate high agility actions,…
Variable Stiffness Actuators prove invaluable for robotics applications in unstructured environments, fostering safe interactions and enhancing task adaptability. Nevertheless, their mechanical design inevitably results in larger and…
Pneumatically-actuated anthropomorphic robots with high degrees of freedom (DOF) offer significant potential for physical human-robot interaction. However, precise control of pneumatic actuators is challenging due to their inherent…
Recursive matrix relations for the complete dynamics of a 3-PRP planar parallel robot are established in this paper. Three identical planar legs connecting to the moving platform are located in the same vertical plane. Knowing the motion of…
Based on the idea of variable stiffness mechanisms, a variety of such mechanisms is shown in this work. Specifically, 2-DOF parallel kinematic machines equipped with redundant actuators and non-linear springs in the actuated joints are…
Recursive modelling for the kinematics of a 3-PRP planar parallel robot is presented in this paper. Three planar chains connecting to the moving platform of the manipulator are located in a vertical plane. Knowing the motion of the…
Cable-Driven Parallel Robots (CDPRs) offer high payload capacities, large translational workspace and high dynamic performances. The rigid base frame of the CDPR is connected in parallel to the moving platform using cables. However, their…
Recursive matrix relations for kinematics and dynamics of the Orthoglide parallel robot having three concurrent prismatic actuators are established in this paper. These are arranged according to the Cartesian coordinate system with fixed…
The paper addresses kinematic and geometrical aspects of the Orthoglide, a three-DOF parallel mechanism. This machine consists of three fixed linear joints, which are mounted orthogonally, three identical legs and a mobile platform, which…