Related papers: Parameter Influence on Porous Bleed Performance fo…
Despite long-term research and development of modern shock absorbers, the effect of variations of several crucial material and model parameters still remains dubious. The goal of this work is therefore a study of the changes of shock…
The hydrodynamic stability behaviour of a two-layer falling film is explored with a floating flexible plate on the top surface. The stress balance at the surface is modeled using a modified membrane equation. There is an insoluble…
We study the behavior of the pulse waves of water into a flexible tube for application to blood flow simulations. In pulse waves both fluid friction and wall viscosity are damping factors, and difficult to evaluate separately. In this…
Microfluidic technology has emerged as a powerful tool for studying complex biological processes with enhanced precision and control. A microfluidic chip was designed to emulate human-like microvascular networks with precise control over…
We computationally study the frictional properties of sheared granular media subjected to harmonic vibration applied at the boundary. Such vibrations are thought to play an important role in weakening flows, yet the independent effects of…
Multiphase shear flows often show banded structures that affect the global behavior of complex fluids e.g. in microdevices. Here we investigate numerically the banding of emulsions, i.e. the formation of regions of high and low volume…
Surface roughness elements are commonly used in wind tunnel testing to hasten the laminar-turbulent transition of the boundary layer in model tests to mimic the aerodynamic effects present in the full-scale application. These devices can…
By means of mesoscopic numerical simulations of a model soft-glassy material, we investigate the role of boundary roughness on the flow behaviour of the material, probing the bulk/wall and global/local rheologies. We show that the roughness…
The shape of a microchannel is usually affected by a significant uncertainty due to the small size of the cross-section, comparable with the typical wall-roughness length scale. Such an uncertainty is present at any scale, but it is…
Superhydrophobic surfaces (SHSs) can reduce the friction drag in turbulent flows. In the laminar regime, it has been shown that trace amounts of surfactant can negate this drag reduction, at times rendering these surfaces no better than…
In the last decade, progresses in additive manufacturing (AM) have paved the way for optimized heat exchangers, whose disruptive design will depend on predictive numerical simulations. Typical AM rough surfaces show limited resemblance to…
One of the most important subjects of hydraulic engineering is the reliable estimation of the transverse distribution in the rectangular channel of bed and wall shear stresses. This study makes use of the Tsallis entropy, genetic…
For evaluation of the undrained thermo-poro-elastic properties of saturated porous materials in conventional triaxial cells, it is important to take into account the effect of the dead volume of the drainage system. The compressibility and…
The probability density function (PDF) of the gas density in subsonic and supersonic, isothermal, driven turbulence is analyzed with a systematic set of hydrodynamical grid simulations with resolutions up to 1024^3 cells. We performed a…
Opposition flow control is a robust strategy that has been proved effective in turbulent wall-bounded flows. Its conventional setup consists of measuring wall-normal velocity in the buffer layer and opposing it at the wall. This work…
A wall-resolved large-eddy simulation (LES) of the fluid flow around a 30P30N airfoil is conducted at a Reynolds number of Rec=750,000 and an angle of attack (AoA) of 9 degrees. The simulation results are validated against experimental data…
Turbulent flow across an in-line array of tube-banks with transverse and longitudinal pitch PT /D = 2.67, and PL /D = 2.31, has been simulated successfully by Large Eddy Simulation (LES) based on the dynamic Smagorinsky subgrid scale model…
Airflow simulation results depend on a good prediction of near wall turbulence. In this paper a comparative study between different near wall treatments is presented. It is applied to two test cases: (1) the first concerns the fully…
We study the influence of the boundary conditions at the solid liquid interface on diffusion in a confined fluid. Using an hydrodynamic approach, we compute numerical estimates for the diffusion of a particle confined between two planes.…
The paper is devoted to a study of the peristaltic motion of blood in the micro-circulatory system. The vessel is considered to be of varying cross-section. The progressive peristaltic waves are taken to be of sinusoidal nature. Blood is…