Related papers: Tunable multimode lasing in a fiber ring
We have specifically investigated the free-space mode locking dynamics of erbium-doped fiber (EDF) mode-locked ultrafast lasers via nonlinear polarization rotation (NPR) in the normal dispersion regime. To do so, we built a passively…
The influence of low temperatures on the performance of a high-power single-frequency fiber laser amplifier is evaluated with a numerical simulation. Cooling the fiber can allow to take advantage of both higher damping of the acoustic waves…
We demonstrate a high power, all-fiber, tunable laser source that can operate in the L-band region. A low power, tunable input laser is amplified with a recently proposed, high efficiency, 6th order cascaded Raman amplifier. The proposed…
Portable mid-infrared (mid-IR) spectroscopy and sensing applications require widely tunable, narrow linewidth, chip-scale, single-mode sources without sacrificing significant output power. However, no such lasers have been demonstrated…
A wavelength spacing tunable, multiwavelength Q-switched mode-locked (QML) fiber laser in an erbium-doped fiber cavity based on graphene oxide deposited on tapered fiber is proposed by choosing the diameter and length of the taper, graphene…
We demonstrate a wavelength spacing tunable, multiwavelength Q-switched mode-locked fiber laser (QML) based on a fiber taper deposited with graphene oxide. The operation of the laser can be understood in terms of the formation of bunches of…
We have developed and characterised a stable, narrow linewidth external-cavity laser (ECL) tunable over 100 nm around 1080 nm, using a single-angled-facet gain chip. We propose the ECL as a low-cost, high-performance alternative to fibre…
A tunable nanoscale "zipper" laser cavity, formed from two doubly clamped photonic crystal nanobeams, is demonstrated. Pulsed, room temperature, optically pumped lasing action at a wavelength of 1.3 micron is observed for cavities formed in…
Three different types of Er doped photosensitive fibers, germanium/erbium (Ge/Er) fiber, tin/germanium/erbium fiber (Sn/Er) and antimony/germanium/erbium fiber (Sb/Er) have been manufactured and studied for use in optical sensor systems.…
We have developed a linearly-polarized Ytterbium-doped fiber ring laser with single longitudinal-mode output at 1064nm for LISA and other space applications. Single longitudinal-mode selection was achieved by using a fiber Bragg grating…
This work demonstrates a broadband tunable narrow-linewidth laser based on scattering-enhanced fiber, covering the E-S-C-L wavelength bands from 1337.47 nm to 1631.39 nm, with a total tuning span of 293.92 nm. The laser employs two…
We propose and demonstrate a high performance four-wavelength erbium-doped fiber laser (EDFL), enabled by a figure-8 compound-ring-cavity (F8-CRC) filter for single-longitudinal-mode (SLM) selection and a polarization-managed four-channel…
Soliton operation and soliton wavelength tuning of erbium-doped fiber lasers mode locked with atomic layer graphene was experimentally investigated under various cavity dispersion conditions. It was shown that not only wide range soliton…
We report on a long wavelength emitting rare earth doped fiber laser with emission centered at 3.5 {\mu}m and tunable across 450 nm. The longest wavelength emission was 3.78 {\mu}m, which is the longest emission from a fiber laser operating…
Random fiber laser (RFL) based on random distributed feedback and Raman gain has earned much attention in recent years. In this presentation, we demonstrate a powerful linearly polarized RFL with spectral adjustment, in which the central…
The optical gain of blue light-emitting electrospun polystyrene fibers doped with a linear multi-fragment molecular dye based on the combination of fluorine-carbazole functional units is investigated, with the aim of correlating emission…
Flexible and tensile wavelength-tunable micrometer-sized random lasers in the form of microporous polymer fiber are demonstrated. The fibers are fabricated by directly drawing from an aqueous mixture and subsequently selective chemical…
Erbium-doped fiber lasers exhibit high coherence and low noise as required for applications in fiber optic sensing, gyroscopes, LiDAR, and optical frequency metrology. Endowing Erbium-based gain in photonic integrated circuits can provide a…
Optical frequency combs have the potential to improve the precision of the radial velocity measurement of celestial bodies, leading to breakthroughs in such fields as exoplanet exploration. For these purposes, the comb must have a broad…
Light storage in an optical fiber is an attractive component in quantum optical delay line technologies. Although silica-core optical fibers are excellent in transmitting broadband optical signals, it is challenging to tailor their…