Related papers: Photometric LiDAR and RGB-D Bundle Adjustment

In this paper, we present a novel method for integrating 3D LiDAR depth measurements into the existing ORB-SLAM3 by building upon the RGB-D mode. We propose and compare two methods of depth map generation: conventional computer vision…

SLAM technology plays a crucial role in indoor mapping and localization. A common challenge in indoor environments is the "double-sided mapping issue", where closely positioned walls, doors, and other surfaces are mistakenly identified as a…

Simultaneous Localization and Mapping (SLAM) plays an important role in robot autonomy. Reliability and efficiency are the two most valued features for applying SLAM in robot applications. In this paper, we consider achieving a reliable…

LiDAR-camera systems have become increasingly popular in robotics recently. A critical and initial step in integrating the LiDAR and camera data is the calibration of the LiDAR-camera system. Most existing calibration methods rely on…

LiDAR bundle adjustment (BA) is an effective approach to reduce the drifts in pose estimation from the front-end. Existing works on LiDAR BA usually rely on predefined geometric features for landmark representation. This reliance restricts…

Simultaneous Localization and Mapping (SLAM) is an essential component of autonomous robotic applications and self-driving vehicles, enabling them to understand and operate in their environment. Many SLAM systems have been proposed in the…

We describe a new method for comparing frame appearance in a frame-to-model 3-D mapping and tracking system using an low dynamic range (LDR) RGB-D camera which is robust to brightness changes caused by auto exposure. It is based on a…

Recent advancements in lidar technology have led to improved point cloud resolution as well as the generation of 360 degrees, low-resolution images by encoding depth, reflectivity, or near-infrared light within each pixel. These images…

In an effort to increase the capabilities of SLAM systems and produce object-level representations, the community increasingly investigates the imposition of higher-level priors into the estimation process. One such example is given by…

Bundle adjustment (BA) is a critical technique in various robotic applications such as simultaneous localization and mapping (SLAM), augmented reality (AR), and photogrammetry. BA optimizes parameters such as camera poses and 3D landmarks…

Solid-state LiDAR-inertial SLAM has attracted significant attention due to its advantages in speed and robustness. However, achieving accurate mapping in extreme environments remains challenging due to severe geometric degeneracy and…

Simultaneous Localization And Mapping (SLAM) is a task to estimate the robot location and to reconstruct the environment based on observation from sensors such as LIght Detection And Ranging (LiDAR) and camera. It is widely used in robotic…

While 3D Gaussian Splatting (3DGS) enabled photorealistic mapping, its integration into SLAM has largely followed traditional camera-centric pipelines. As a result, they inherit well-known weaknesses such as high computational load, failure…

We present an empirical investigation of a new mapping system based on a graph of panoramic depth images. Panoramic images efficiently capture range measurements taken by a spinning lidar sensor, recording fine detail on the order of a few…

In complex environments, low-cost and robust localization is a challenging problem. For example, in a GPSdenied environment, LiDAR can provide accurate position information, but the cost is high. In general, visual SLAM based localization…

The joint optimization of the sensor trajectory and 3D map is a crucial characteristic of bundle adjustment (BA), essential for autonomous driving. This paper presents $\nu$-DBA, a novel framework implementing geometric dense bundle…

This paper proposes a 3D LiDAR SLAM algorithm named Ground-SLAM, which exploits grounds in structured multi-floor environments to compress the pose drift mainly caused by LiDAR measurement bias. Ground-SLAM is developed based on the…

This paper presents a novel fusion technique for LiDAR Simultaneous Localization and Mapping (SLAM), aimed at improving localization and 3D mapping using LiDAR sensor. Our approach centers on the Inferred Attention Fusion (INAF) module,…

Constructing precise global maps is a key task in robotics and is required for localization, surveying, monitoring, or constructing digital twins. To build accurate maps, data from mobile 3D LiDAR sensors is often used. Mapping requires…

Achieving real-time Simultaneous Localization and Mapping (SLAM) based on 3D Gaussian splatting (3DGS) in large-scale real-world environments remains challenging, as existing methods still struggle to jointly achieve low-latency pose…