Related papers: Acoustic Metamaterial Beam Splitter
A three-dimensional acoustic Luneburg meta-lens has the advantage of refracting sound waves for all incident angles and focusing higher sound pressure compared to a two-dimensional lens. The lens made of plastic with a diameter of 120 mm…
Luneburg lens is a gradient index lens that focuses the incoming wave on the opposite side of the lens without aberration. We developed a two-dimensional acoustic Luneburg lens by changing the refractive index of the medium in the lens. It…
Acoustic Luneburg lens is a symmetric gradient-index lens with a refractive index decreasing radially from the centre to the outer surface. It can be used to manipulate acoustic wave propagation with collimation and focusing capabilities.…
In this paper, a novel structural Luneburg lens with local resonators is proposed. This lens allows for the realization of subwavelength focusing in low frequency range. The lens is achieved by graded refractive index from the lens centre…
Acoustic metamaterials have become a novel and effective way to control sound waves and design acoustic devices. In this study, we design a 3D acoustic metamaterial lens (AML) to achieve point-to-point acoustic communication in air: any…
We report ultrasound beam steering based on 2D and 3D flattened acoustic metamaterial Luneburg lenses at 40 kHz. The effective properties of the lenses are obtained by using the quasi-conformal transformation (QCT) technique and solving the…
Applying the directionality of a Luneburg lens, a sound reception system for ships is designed. A two-dimensional acoustic Luneburg lens which is made of 253 acrylic pipes of different radii which control the refractive index is used. It…
This paper investigates the acoustic Luneburg Lens (ALL) as a design framework for guiding acoustic wave propagation. In this study, we propose to develop an acoustic waveguide based on the characteristics of both acoustic wave focusing and…
Luneburg lens is a symmetric gradient-index lens with a refractive index that increases from the outer surface to the center in a radial manner. It has the ability to focus and collimate waves, which makes it useful for energy harvesting,…
Lenses are typically based on refractive index profiles derived from the geometric approximation of high-frequency waves, yet the critical issue of impedance mismatch is often neglected. Mismatched devices suffer from unwanted reflections…
As an inversely designed artificial device, metasurface usually means densely arranged meta-atoms with complex substructures. In acoustics, those meta-atoms are usually constructed by multi-folded channels or multi-connected cavities of…
The recently proposed concept of metamaterials has opened exciting venues to control wave-matter interaction in unprecedented ways. Here we demonstrate the relevance of metamaterials for inducing acoustic birefringence, a phenomenon which…
In this paper we present the design of a flat-base Luneburg type of lens antenna, designed for wide angle scan. The antenna consists of a 11-layer lens, fed at its base by a 6x6 array of waveguides. The lens is broadband and has a high…
Backscatter communications is attractive for its low power requirements due to the lack of actively radiating components; however, commonly used devices are typically limited in range and functionality. Here, we design and demonstrate a…
In this work, we designed and studied a feasible dual-layer binary metagrating, which can realize controllable asymmetric transmission and beam splitting with nearly perfect performance. Owing to ingenious geometry configuration, only one…
In this paper, a novel gradient index (GRIN) acoustic metamaterial is proposed based on the concept of optical modified generalized Luneburg lens (MGLL). With the MGLL, double-foci and high energy density between the two foci can be…
We consider the problem of an atomic beam propagating quantum mechanically through an atom beam splitter. Casting the problem in an adiabatic representation (in the spirit of the Born-Oppenheimer approximation in molecular physics) sheds…
In this paper, we present an approach to ultrasonic beam-forming and beam-steering in structures based on the concept of embedded non-resonant acoustic metamaterial lenses. The lens design exploits the principle of acoustic drop-channel…
Recent studies have introduced a new class of two-dimensional acoustic metamaterials whose dispersion and propagation properties results from the use of geometric inhomogeneities in the form of Acoustic Black Holes (ABH). The ABH is an…
Similar to their optic counterparts, acoustic components are anticipated to flexibly tailor the propagation of sound. However, the practical applications, e.g. for audible sound with large wavelengths, are frequently hampered by the issue…