Related papers: The CCD Controller and Detector
Most of the scientific instrumentation as well as the tracking systems and the Shack- Hartmann wavefront analysers at the Italian National Telescope Galileo use CCDs as detectors. The characterization of detectors is of fundamental…
The control system and the entire architecture of the High Resolution Spectrograph (SARG) for the Italian National Telescope "Galileo" (TNG) are here described. The concept of SARG instrument controls is similar to that of the other TNG…
CCDs characterization is the preliminary step to perform before the CCD can be properly used at the telescope. Most of the scientific instrumentation at the Italian National Telescope Galileo use CCDs as detectors. In particular the optical…
This paper reviews the scientific use of the TNG from the beginning of regular observations till the end of 2007. Statistics are given for the time request, use and productivity of the telescope and its focal plane instruments. Information…
Large astronomical instruments using tens to hundreds of optical or infrared science detectors pose specific challenges for detector control, where, in addition to performance, other engineering aspects like scalability, power consumption,…
SOXS is the new spectrograph for the ESO NTT telescope able to cover the optical and NIR bands thanks to two different arms: the UV-VIS (350-850 nm), and the NIR (800-2000 nm). In this article, we describe the final design of the visible…
We describe the commissioning of a system which has been built to investigate optimal operation of CCDs for the LSST telescope. The test system is designed for low vibration, high stability operation and is capable of illuminating a…
The development of Hybrid CMOS Detectors (HCDs) for X-Ray telescope focal planes will place them in con- tention with CCDs on future satellite missions due to their faster frame rates, flexible readout scenarios, lower power consumption,…
The design and implementation of astronomical cameras based on the large-format CCD and CMOS detectors is described in this paper. The Dinacon-5 controller is used for work with the CCDs and to achieve high performance and low noise. A new…
This document lists a set of (refereed and unrefereed) scientific publications based on data taken with the instruments of the Italian Telescopio Nazionale Galileo (TNG, mainly from the year 2000 onward) and the technical papers describing…
In this paper, we introduce a general scientific CCD simulation and test system which can meet the test requirements of different types of CCD chips from E2V company, such as measuring different signals output from modules of a CCD…
The present paper describes the construction, the installation and the operation of the Optical Imager Galileo (OIG), a scientific instrument dedicated to the 'imaging' in the visible. OIG was the first instrument installed on the focal…
Current optical space telescopes rely upon silicon Charge Coupled Devices (CCDs) to detect and image the incoming photons. The performance of a CCD detector depends on its ability to transfer electrons through the silicon efficiently, so…
The purpose of this project is to investigate the use of charge couple devices (CCDs) to detect electrons directly. This can be done in transmission electron microscopy (TEM) for electrons over 100 KeV, but for space plasma instruments,…
SOXS will be the new spectroscopic facility for the ESO NTT telescope able to cover the optical and NIR bands by using two different arms: the UV-VIS (350-850 nm), and the NIR (800-2000 nm). In this article, we describe the development…
Charge Coupled Devices (CCDs) have been successfully used in several high energy physics experiments over the past two decades. Their high spatial resolution and thin sensitive layers make them an excellent tool for studying short-lived…
The expected performance of the ATLAS and CMS detectors at the Large Hadron Collider (LHC) in QCD and top quark measurements is discussed, with a focus on the early data taking phase. Such processes are amongst the primary backgrounds in…
The highly sensitive millimeter-wave telescope is an important tool for accurate measurement of Cosmic Microwave Background (CMB) radiation, and its core component is a detector array located in a cryogenic focal plane. The feasibility of…
In recent years, CCD-in-CMOS TDI image sensors are becoming increasingly popular for many small satellite missions to assure a fast and affordable access to space for Low Earth Observation. Our monolithic CCD-in-CMOS TDI imager features a…
The Fine Pixel CCD (FPCCD) is one of the candidate sensor technologies for the ILC vertex detector. It will be located near interaction point and require high radiation tolerance. It will thus be operated at -40 degree C to improve…