Related papers: Superconducting Transformer for Superconducting Ca…

Nb-sheathed Sr0.6K0.4Fe2As2 superconducting wires have been fabricated using the powder-in-tube (PIT) method for the first time and the superconducting properties of the wires have been investigated. The transition temperature (Tc) of the…

Large pulsed magnetic fields up to 60 Tesla are used to suppress the contribution of superconducting fluctuations (SCF) to the ab-plane conductivity above Tc in a series of YBa2Cu3O(6+x). These experiments allow us to determine the field…

A concept of a 650 MHz CW magnetron transmitter with fast control in phase and power, based on two-stage injection-locked CW magnetrons, has been proposed to drive Superconducting Cavities (SC) for intensity-frontier accelerators. The…

Magnetisation and magnetoresistance measurements have been carried out on superconducting Ba1-xKxFe2As2 samples with x=0.40 and 0.50. From low field magnetization data carried out at different temperatures below TC, HC1 has been extracted.…

Capacitive devices are customarily used as probes to measure the level of noble liquids in detectors operated for neutrino studies and dark matter searches. In this work we describe the use of a high-temperature superconducting material as…

A proposal for a 10-120 mA proton linac employing superconducting beta-graded, CERN type, four cell cavities at 352 MHz is presented. The high energy part (100 MeV-1 GeV) of the machine is split in three beta-graded sections, and transverse…

We report on the superconducting properties of In doped SnTe which has recently been explored as a topological crystalline superconductor. Single crystals of Sn0.5In0.5Te have been synthesized by modified Bridgman method. Resistivity…

Superconducting transitions are driven by thermal fluctuations close to the transition temperature, Tc. These fluctuations are averaged out in global measurements, leaving imprints on susceptibility and resistance measurements. Here, we use…

The noncentrosymmetric superconductor TaOs has been characterized using x-ray diffraction, resistivity, magnetization, and specific heat measurements. Magnetization and specific heat measurements show a bulk superconducting transition at…

We report on a macroscopic version of the single-electron transistor (SET), which we call the soliton tunneling transistor (STT). The STT, consists of a gate capacitor coupled to a NbSe$_{3}$ crystal with a charge density wave (CDW). The…

A wide variety of superconducting oxides are used to test a general model of high pressure induced transition temperature (T c) changes. The T c 's vary from a low of 24 K to a high of 164 K. Although the model is capable of predicting both…

Pressure plays an essential role in the induction1 and control2,3 of superconductivity in iron-based superconductors. Substitution of a smaller rare-earth ion for the bigger one to simulate the pressure effects has surprisingly raised the…

We report on the realization of a single-electron source, where current is transported through a single-level quantum dot (Q), tunnel-coupled to two superconducting leads (S). When driven with an ac gate voltage, the experiment demonstrates…

The binary polyhydrides of heavy rare earth lutetium that shares a similar valence electron configuration to lanthanum have been experimentally discovered to be superconductive. The lutetium polyhydrides were successfully synthesized at…

We address the question of probing the supercurrents in superconducting (SC) samples on a local scale by performing Scanning Tunneling Spectroscopy (STS) experiments with a SC tip. In this configuration, we show that the tunneling…

We report results of the experimental test of the High Temperature Superconductor based fast cycling prototype accelerator magnet capable to operate up to about 300 Tesla per second field ramping rate with some 0.5 T field in the magnet…

High-Tc Type-II ceramic-superconductor at temperature T < Tc, under presence of magnetic-field B becomes non-superconducting if B exceeds a critical value Bc2. Thus at T < Tc, by application/absence of critical magnetic- field as a…

Measurements of specific heat between 80 mK to 4 K and electrical resistivity between 80 mK to 10 K were carried out for polycrystalline CePt3Si samples cut into small pieces (typically $\sim $10 mg). In the specific heat measurements, we…

The increase of energy in accelerators over the past decades has led to the design of superconducting magnets for both accelerators and the associated detectors. The use of Nb-Ti superconducting materials allows an increase in the dipole…

High temperature superconductor (HTS) (RE)Ba2Cu3Ox (REBCO) conductor on round core cable (CORC) has high current carrying capacity for high field magnet and power applications. In REBCO CORC cables, current redistribution occurs among tapes…