Related papers: Electro-Thermal Modelling by Novel Variational Met…
Superconductors play a crucial role in the advancement of high-field electromagnets. Unfortunately, their performance can be compromised by thermomagnetic instabilities, wherein the interplay of rapid magnetic and slow heat diffusion can…
Understanding the thermal behaviour of superconducting accelerator magnets is essential to ensure their stable and reliable operation. This work presents an extension of the Finite Element Quench Simulator (FiQuS) Multipole module to…
Superconducting high field magnets have the capability to generate over 40 T, with multiple existing practical applications globally. However, at such high magnetic fields, these magnets are prone to rapid electrothermal quench which can…
In this paper, we propose an optimized field/circuit coupling approach for the simulation of magnetothermal transients in superconducting magnets. The approach improves the convergence of the iterative coupling scheme between a…
In high power density superconducting motors, superconducting tapes are usually stacked and connected together at terminals to improve the current capacity. When a parallel sinusoidal magnetic field is applied on this partially coupled…
HTS are feasible for hight power applications because of the smaller consumption demand of the cooling system in comparison to the whole power device. Real industral devices contain superconductors with 2D and 3D geometry (coated conductors…
REBCO coated conductors (CCs) have the potential to widen considerably the application areas of superconductivity. Quench protection of REBCO-based devices represents one of the major obstacles to this expansion. Thermal conductivity data…
The field error due to magnetization of superconductors in a superconducting magnet can significantly compromise the field homogeneity which is extremely important for NMR magnets. This is especially true for high Tc superconducting…
Several coil structures have been used in accelerator superconducting quadrupole magnets, and cos2{\theta} quadrupole magnets are the most mature in theoretical research and engineering applications. However, the cos2{\theta} quadrupole…
High-temperature superconductors (HTS) could enable high-field magnets much stronger than is possible with Nb-Ti and Nb3Sn, but two key limiting factors have so far been the difficulty of achieving high critical current density in…
To tackle the strong multi-scale problem in the quench simulation of superconducting accelerator magnets, this work proposes a hybrid numerical method which uses two-dimensional first-order finite-elements in the magnet cross-section and…
We discuss recent elastic neutron scattering and scanning tunneling experiments on high-T_c cuprates exposed to an applied magnetic field. In particular we show that a physical picture consisting of antiferromagnetic vortex cores operating…
When modeling superconducting devices based on REBCO tapes andworking near or above the critical current value (i.e. I> Ic), the power-law model is not always accurate. In our previous works, we proposed the overcritical current model,…
Application of an external AC magnetic field parallel to superconducting tapes helps in eliminating the magnetization caused by the shielding current induced in the flat faces of the tapes. This method helps in realizing a magnet system…
This paper presents a novel finite-element approach for the electromagnetic modeling of superconducting coated conductors. We combine a thin-shell (TS) method to the $H$-$\phi$ formulation to avoid the meshing difficulties related to the…
Nowadays, there is growing interest in using superconducting wires or tapes for the design and manufacture of devices such as cables, coils, rotating machinery, transformers and fault current limiters among others. Their high current…
Superconductors have been being applied to a variety of large-scale power applications, including magnets, electric machines, and fault current limiters, because they can enable a compact, lightweight and high efficiency design. In…
High-temperature superconductor (HTS) coated conductors (CC) are often wound into pancake coils with electrical insulation in-between the turns. The copper terminals are used for current injection and conduction cooling. An inherent…
The possibility of a substantial reduction of weight and size of electrical generators is the main incentive behind the effort to develop superconducting armature windings based on coated conductors in the form of wide tapes with large…
A superconductor is stable if it does not quench. Quench is a short-time physics problem. For its deeper understanding of, and how to avoid quench, the physics behind stability has to be analysed. A previously suggested dynamic relaxation…