Related papers: Femtosecond Laser Engraved 2D Tunable Optofluidic …
We describe a technique for surface and sub-surface micro-machining of glass substrates using tightly focused femtosecond laser pulses at a wavelength of 1660 nm. Although silicate glass is normally transparent at this wavelength, the…
We report on fabrication of whispering-gallery-mode microlasers in a Nd:glass chip by femtosecond laser three-dimensional (3D) micromachining. Main fabrication procedures include the fabrication of freestanding microdisks supported by thin…
A promising solution for scalable integrated optics of trapped-ion quantum processors are curved waveguides guiding visible light within sapphire bulk material. To the best of our knowledge, no curved waveguides were investigated in…
A method is presented for fabrication of femtosecond laser written waveguides in glass to remove the need for polishing of substrates after processing. It is shown that by amplitude masking the fabrication laser beam near the sample edge…
Femtosecond laser micromachining (FLM) fabricated waveguides inherently form elliptical cores due to differences in focal spot size and the Rayleigh range of the microscope objective. Consequently, it is essential to study their propagation…
We report low-loss multiscan waveguides fabricated in fused silica using femtosecond laser writing technology. The multiscan principle allows to tailor the writing regime to excel at key features of any integrated photonic platform:…
Dewetting of thin metal films is one of the most widespread method for functional plasmonic nanostructures fabrication. However, simple thermal-induced dewetting does not allow to control degree of nanostructures order without additional…
We report the first direct femtosecond laser-writing of buried channel waveguides in monocrystalline ZnS. We also report the first single-mode Cr:ZnS depressed cladding buried waveguide laser manufactured by femtosecond laser writing. The…
Femtosecond laser writing is applied to form Bragg grating waveguides in the diamond bulk. Type II waveguides are integrated with a single pulse point-by-point periodic laser modification positioned towards the edge of the waveguide core.…
We present a laterally emitting, coupled cavity micro fluidic dye ring laser, suitable for integration into lab-on-a-chip micro systems. The micro-fluidic laser has been successfully designed, fabricated, characterized and modelled. The…
Writing optical waveguides with femtosecond laser pulses provides the capability of forming three-dimensional photonic circuits for manipulating light fields in both linear and nonlinear manners. To fully explore this potential, large…
In this work, for the first time of our knowledge, we present a well-supported procedure to fabricate ridge optical waveguides onto thin films of PLZT by femtosecond laser ablation. In order to achieve smooth guiding structures to guarantee…
Large-scale microfluidic microsystems with complex three-dimensional (3D) configurations are highly in demand by both fundamental research and industrial application, holding the potentials for fostering a wide range of innovative…
Currently, direct-write waveguide fabrication is probably the most widely studied application of femtosecond laser micromachining in transparent dielectrics. Devices such as buried waveguides, power splitters, couplers, gratings and optical…
Femtosecond laser modification of fused silica enables precise surface tailoring for the fabrication of micro-optical components such as microlenses and diffractive elements. However, the process is governed by laser-matter interactions…
We show that with the use of a short wavelength (520nm) femtosecond laser source, Two-Photon Polymerization (2PP) fabrication of micro-membrane designs with channel sizes down to 1 {\mu}m is possible, using commercial photopolymers OrmoComp…
Silicon is an excellent material for microelectronics and integrated photonics with untapped potential for mid-IR optics. Despite broad recognition of the importance of the third dimension, current lithography methods do not allow…
An all-diamond photonic circuit was implemented by integrating a diamond microsphere with a femtosecond-laser-written bulk diamond waveguide. The near surface waveguide was fabricated by exploiting the Type II fabrication method to achieve…
Micro/nano electro-mechanical systems (MEMS/NEMS) are constantly attracting an increasing attention for their relevant technological applications in fields ranging from biology, medicine, ecology, energy to industry. Most of the…
Femtosecond-laser direct waveguide writing is progressively emerging as an alternative to conventional techniques to develop complex photonic devices, for applications ranging from classical and quantum information processing, to sensing…