Related papers: Improved Delayed Detached Eddy Simulation with Rey…
A hybrid RANS/LES framework is developed based on a recently proposed Improved Delayed Detached Eddy Simulation (IDDES) model combined with a variant of recycling and rescaling method of generating inflow turbulence. This framework was…
We present results of implicit large eddy simulation (LES) and different Reynolds-averaged Navier-Stokes (RANS) models of the MTU 161 low pressure turbine at an exit Reynolds number of 90,000 and exit Mach number of 0.6. The LES results are…
This work extends a pressure-gradient sensor for boundary-layer separation originally developed for the $k-\omega$ shear-stress transport Reynolds-averaged Navier-Stokes (RANS) model (Griffin et al., 2025, J. Turb.) to the Improved Delayed…
Predictive simulation of many complex flows requires moving beyond Reynolds-averaged Navier-Stokes (RANS) based models to representations resolving at least some scales of turbulence in at least some regions of the flow. To resolve…
This work proposes a data-driven explicit algebraic stress-based detached-eddy simulation (DES) method. Despite the widespread use of data-driven methods in model development for both Reynolds-averaged Navier-Stokes (RANS) and large-eddy…
Large eddy simulation (LES) of turbulence in complex geometries and domains is often conducted with high aspect ratio resolution cells of varying shapes and orientations. The effects of such anisotropic resolution are often simplified or…
Despite well-known limitations of Reynolds-averaged Navier-Stokes (RANS) simulations, this methodology remains the most widely used tool for predicting many turbulent flows, due to computational efficiency. Machine learning is a promising…
We study the error scaling properties of large-eddy simulation (LES) in the outer region of wall-bounded turbulence at moderately high Reynolds numbers. In order to avoid the additional complexity of wall-modeling, we perform LES of…
We conduct wall-modeled LES (WMLES) of a pressure-driven three-dimensional turbulent boundary layer (3DTBL) developing on the floor of a bent square duct to investigate the predictive capability of three widely used wall models, namely, a…
The simulation of high Reynolds number (Re) separated turbulent flows faces significant problems for decades: large eddy simulation (LES) is computationally too expensive, and Reynolds-averaged Navier-Stokes (RANS) methods and hybrid…
A previously developed modeling procedure for large eddy simulations (LESs) is extended to allow physical space implementations for inhomogeneous flows. The method is inspired by the well-established theoretical analyses and numerical…
Fluid turbulence is an important problem for physics and engineering. Turbulence modeling deals with the development of simplified models that can act as surrogates for representing the effects of turbulence on flow evolution. Such models…
Reynolds-averaged Navier-Stokes (RANS) equations are presently one of the most popular models for simulating turbulence. Performing RANS simulation requires additional modeling for the anisotropic Reynolds stress tensor, but traditional…
Rotating turbulent flows form a challenging test case for large-eddy simulation (LES). We, therefore, propose and validate a new subgrid-scale (SGS) model for such flows. The proposed SGS model consists of a dissipative eddy viscosity term…
A deep learning (DL) closure model for large-eddy simulation (LES) is developed and evaluated for incompressible flows around a rectangular cylinder at moderate Reynolds numbers. Near-wall flow simulation remains a central challenge in…
In this study, we conduct a parametric analysis to evaluate the sensitivities of wall-modeled large-eddy simulation (LES) with respect to subgrid-scale (SGS) models, mesh resolution, wall boundary conditions and mesh anisotropy. While such…
Wall-modeled large-eddy simulation (WMLES) is widely recognized as a useful method for simulation of turbulent flows at high Reynolds numbers. Nevertheless, a continual issue in different wall models is the shift of the mean velocity…
Wall-bounded turbulence is relevant for many engineering and natural science applications, yet there are still aspects of its underlying physics that are not fully understood, particularly at high Reynolds numbers. In this study, we…
A new approach to turbulence simulation, based on a combination of large-eddy simulation (LES) for the whole flow and an array of non-space-filling quasi-direct numerical simulations (QDNS), which sample the response of near-wall turbulence…
We examine the role of anisotropic subgrid-scale (SGS) stress in wall-modeled large-eddy simulation (WMLES) of flow over a spanwise-uniform Gaussian-shaped bump, with emphasis on predicting flow separation. The simulations show that…