Related papers: Sky localization of space-based detectors with tim…
The proposed space-borne laser interferometric gravitational wave (GW) observatory TianQin adopts a geocentric orbit for its nearly equilateral triangular constellation formed by three identical drag-free satellites. The geocentric distance…
In the detection of gravitational waves in space, the arm lengths between spacecraft are not equal due to their orbital motion. Consequently, the equal arm length Michelson interferometer used in Earth laboratories is not suitable for…
Space-borne interferometric gravitational wave detectors, sensitive in the low-frequency (millihertz) band, will fly in the next decade. In these detectors the spacecraft-to-spacecraft light-travel-times will necessarily be unequal,…
The method of time delay interferometry (TDI) is proposed to cancel the laser noise in space-borne gravitational-wave detectors. Among all different TDI combinations, the most commonly used ones are the orthogonal channels A, E and T, where…
Space-based gravitational wave (GW) observatories, such as the future Laser Interferometer Space Antenna (LISA), employ synthetic Time Delay Interferometry (TDI) to cancel the otherwise overwhelming laser frequency noise. The phase readouts…
Space-based gravitational wave (GW) detectors are designed for wave sources in the millihertz band with different locations and orientations. Time-delay interferometry (TDI) technique is an indispensable ingredient in space-borne GW…
The LISA mission will likely be a signal dominated detector, such that one challenge is the separation of the different astrophysical sources, and to distinguish between them and the instrumental noise. One of the goals of LISA is to probe…
Time delay interferometry (TDI) is a key technique employed in gravitational wave (GW) space missions to mitigate laser frequency noise by combining multiple laser links and establishing an equivalent equal arm interferometry. The null…
Three spacecraft of LISA/TAIJI mission follow their respective geodesic trajectories, and their interferometric arms are unequal and time-varying due to orbital dynamics. Time-delay interferometry (TDI) is proposed to suppress the laser…
Equal-arm interferometric detectors of gravitational radiation allow phase measurements many orders of magnitude below the intrinsic phase stability of the laser injecting light into their arms. This is because the noise in the laser light…
Space-borne interferometric gravitational-wave detectors, sensitive in the low-frequency (mHz) band, will fly in the next decade. In these detectors, the spacecraft-to-spacecraft light-travel times will necessarily be unequal and…
Time Delay Interferometry (TDI) is often utilized in the data pre-processing of space-based gravitational wave detectors, primarily for suppressing laser frequency noise. About twenty years ago, assuming armlengths remain constant over…
Time-delay interferometry (TDI) is essential for space-based gravitational wave (GW) missions to effectively suppress laser frequency noise and achieve targeting sensitivity. The principle of the TDI is to synthesize multiple laser link…
Time-delay interferometry (TDI) is a crucial technology for space-based gravitational wave detectors. Previous studies have identified the optimal TDI configuration for the first-generation. In this research, we used an Algebraic approach…
The space-based gravitational-wave observatory LISA, a NASA-ESA mission to be launched after 2012, will achieve its optimal sensitivity using Time Delay Interferometry (TDI), a LISA-specific technique needed to cancel the otherwise…
LISA will detect gravitational waves (GWs) in the milli-Hz frequency band in space. Time-delay interferometry (TDI) is developed to suppress laser frequency noise beneath the acceleration noise and optical metrology noise. To identify…
Time-Delay Interferometry (TDI) is essential for space-based gravitational wave (GW) missions, as it suppresses laser frequency noise and achieve the required sensitivity. Beyond the standard Michelson configuration, a variety of…
Probing extra polarizations in gravitational waves (GWs) with space-based detectors is the most direct method for testing theories of gravity. In this paper, by employing the second-generation time-delay interferometry (TDI) to cancel out…
Space-based gravitational wave detectors cannot keep rigid structures and precise arm length equality, so the precise equality of detector arms which is required in a ground-based interferometer to cancel the overwhelming laser noise is…
The time delay interferometry (TDI) is an algorithm proposed to suppress the laser frequency noise in space-borne gravitational wave detectors. As a post-processing technique, it is implemented by constructing a virtual equal arm…