Related papers: Enhance the Field Strength by Adding Soft Iron in …
We describe the construction of a prototype hybrid permanent magnet dipole and quadruple. The magnet consists of two concentric rings of SmCo magnetic material 5 cm in length. The outer ring is made of 16 uniformly magnetized blocks…
We describe a framework to assemble permanent-magnet cubes in 3D-printed frames to construct dipole, quadrupole, and solenoid magnets, whose field, in the absence of iron, can be calculated analytically in three spatial dimensions. Rotating…
Permanent magnets together with yokes to concentrate the magnetic flux into a cylindrical air-gap are widely employed in Kibble balances. These experiments require a uniform magnetic flux density along a vertical path, typically a…
The standard design method for conventional straight dipole magnets is improved in this paper. The good field region is not symmetric with respect to the magnet mechanical center, and its width is not enlarged to include the beam sagitta.…
Here we present designs for a static septum magnet with two adjacent apertures where ideally one aperture has a uniform dipole field and the other zero field. Two designs are considered. One is a true septum magnet with a thin layer of…
A design for a permanent magnet system is proposed that generates spatially homogeneous, constant magnetic field gradients, thus creating conditions suitable for MRI without gradient coils and amplifiers. This is achieved by superimposing a…
A general scheme for increasing the difference in magnetic flux density between a high and a low magnetic field region by removing unnecessary magnet material is presented. This is important in, e.g., magnetic refrigeration where magnet…
A permanent magnet assembly in which the flux density can be altered by a mechanical operation is often significantly smaller than comparable electromagnets and also requires no electrical power to operate. In this paper five permanent…
Well controlled and highly stable magnetic fields are desired for a wide range of applications in physical research, including quantum metrology, sensing, information processing, and simulation. Here we introduce a low-cost hybrid assembly…
High gradient quadrupoles are necessary for different applications such as laser plasma acceleration, colliders, and diffraction limited light sources. Permanent magnet quadrupoles provide a higher field strength and compactness than…
Axial flux permanent magnet designs are compact and becoming an attractive design for electric vehicles as an auxiliary braking system. This work develops the design of an Axial Flux Permanent Magnet Eddy current brake for application on…
Magnetically-sensitive experiments and newly-developed quantum technologies with integrated high-permeability magnetic shields require increasing control of their magnetic field environment and reductions in size, weight, power and cost.…
A new concept of permanent magnet systems for guiding superparamagnetic particles on arbitrary trajectories is proposed. The basic concept is to use one magnet system with a strong and homogeneous (dipolar) magnetic field to magnetize and…
A new, hybrid design is proposed to eliminate the main systematic errors in the frozen spin, storage ring measurement of the proton electric dipole moment. In this design, electric bending plates steer the particles, and magnetic focusing…
Two high field quality quadrupole magnets QF1FF and QD0FF are required for the final focus system of the ATF3. In this paper we focus on the design of the QF1FF magnet. The proposed design is a permanent magnet quadrupole (PMQ) with…
In this paper we discuss the main principles of magnetic design for superconducting magnets (dipoles and quadrupoles) for particle accelerators. We give approximated equations that govern the relation between the field/gradient, the current…
Homogeneous magnetic fields can be generated through the strategic arrangement of permanent magnets. The Halbach array serves as a prominent example of an effective design following this principle. However, it is a two-dimensional approach…
We present a design for producing precisely adjustable and alternating single-axis magnetic fields based on nested Halbach dipole pairs consisting of permanent magnets only. Our design allows for three dimensional optical and mechanical…
Switchable adhesives have the potential to improve the manufacturing and recycling of parts and to enable new modes of motility for soft robots. Here, we demonstrate magnetically-switchable adhesion of a two-phase composite to non-magnetic…
The design of a magnetic field source that can switch from a high field to a low field configuration by rotation by $90^\circ$ of a set of iron pieces is investigated using topology optimization. A Halbach cylinder is considered as the…