Related papers: Thermoelectric PbTe-CdTe bulk nanocomposite
A nanopowder from p-Bi-Sb-Te with particles ~ 10 nm were fabricated by the ball milling using different technological modes. Cold and hot pressing at different conditions and also SPS process were used for consolidation of the powder into a…
Indium-doped semiconductor crystals CdZnTeSe with several different compositions of raw materials were grown via the vertical Bridgman method under high-pressure argon. For the first time, these crystals were obtained via a combined method…
The role of the sublimation of the compound and of the evaporation of the constituents from the gold nanoparticle during the growth of semiconductor nanowires is exemplified with CdTe-ZnTe heterostructures. Operating close to the upper…
We show here for the first time the use of a cold sintering process (CSP) to sinter CoSb3-based thermoelectric materials. CSP at 150 {\deg}C for 90 min under a uniaxial pressure of 750 MPa yields pieces with a relative density of 86 %,…
Graded composition CdxZn1-xTe films were prepared by growing several alternate layers of CdTe and ZnTe by the Isothermal Close Space Sublimation technique. The thickness of both kinds of layers was modified along the structure to produce an…
Tellurium (Te) is an intrinsically p-type doped narrow bandgap semiconductor with excellent electrical conductivity and low thermal conductivity. Bulk trigonal Te has been theoretically predicted and experimentally demonstrated to be an…
Topological superconductors (TSCs) hosting Majorana zero modes (MZMs) offer a pathway to fault-tolerant quantum computation. PdTe is a promising TSC candidate due to its topological surface states and a reasonable superconducting critical…
Cd1-xZnxTe crystals with x in the range of 0.1-0.2 were grown by the high-pressure vertical Bridgman method from pre-synthesized CZT. Resistive graphite heaters were used to control the temperature profiles within the furnaces, and an argon…
The average and local structures of the (PbTe)1-x(PbS)x system of thermoelectric materials has been studied using the Rietveld and atomic pair distribution function (PDF) methods. Samples with 0:25 < x are macroscopically phase separated.…
We present the full thermoelectric characterization of nanostructured bulk PbTe and PbTe-PbSe samples fabricated from colloidal core-shell nanoparticles followed by spark plasma sintering. An unusually large thermopower is found in both…
Thermoelectric (TE) technology enables direct heat-to-electricity conversion and is gaining attention as a clean, fuel-saving, and carbon-neutral solution for industrial, automotive, and marine applications. Despite nearly a century of…
p-type Ce1.05Fe4Sb12.04 filled skutterudites with much improved thermoelectric properties have been synthesized by rapidly converting nearly amorphous ribbons into crystalline pellets under pressure. It is found that this process greatly…
Topological insulators (TIs) and topological crystal insulators (TCIs) exhibit exotic surface properties. We present optimised growth procedures to obtain high quality bulk crystals of the TCIs Pb_(1-x)Sn_(x)Te and Pb_(1-x)Sn_(x)Se, and…
The thermoelectric properties between 10 and 300 K and the growth of single crystals of n-type and p-type GeBi4Te7, GeSb4Te7, and the Ge(Bi1-xSbx)4Te7 solid solution are reported. Single crystals were grown by the modified Bridgman method,…
The in-plane coefficient of thermal expansion (CTE) for CdSe nanoplatelets with the zinc-blende structure containing from two to five monolayers is calculated from first principles within the quasiharmonic approximation. A comparison of the…
While cadmium telluride (CdTe) thin films are being used in solar cell prototyping for decades, the recent advent of two-dimensional (2D) materials challenges the fundamental limit for thickness of conventional CdTe layers. Here, we report…
In this paper we report on detailed temperature and magnetic field dependence of m agnetization of IV-VI semiconductor PbTe doped with mixed valence transition metal Cr$^{2+/3+}$. The material is studied solely by an integral…
For simultaneously achieving the high-power factor and low lattice thermal conductivity of Si-Ge based thermoelectric materials, we employed, in this study, constructively modifying the electronic structure near the chemical potential and…
Colloidal quantum dots (cQDs) are now a mature nanomaterial with optical properties customizable through varying size and composition. However, their use in optical devices is limited as they are not widely available in convenient forms…
This study explores the suitability of semi-insulating compounds, specifically (Cd,Mn)Te and (Cd,Mn)(Te,Se), as materials for room temperature X-ray and gamma-ray detectors. These compounds were grown using the Bridgman method, known for…