Related papers: High-temperature stable refractory high-entropy na…
High-entropy alloys (HEAs) are potential candidates for applications as refractory materials. While dual-phase refractory HEAs containing an ordered phase exhibit high hardness, there is high interest in developing intermetallic-free and…
Amorphous complexions have recently been demonstrated to simultaneously enhance the ductility and stability of certain nanocrystalline alloys. In this study, three quinary alloys (Cu-Zr-Hf-Mo-Nb, Cu-Zr-Hf-Nb-Ti, and Cu-Zr-Hf-Mo-W) are…
The mechanical performance and microstructures of a CoCrNi medium-entropy alloy (MEA) and NCoCrNi, alloyed with 0.5at% N, after high pressure torsion (HPT) and subsequent annealing treatments in a temperature range of 150-1000 {\deg}C were…
In this study Mo-Nb-Ta-W refractory high-entropy alloys (R-HEAs) have been studied for their phase stability for a wide temperature range (100 K to 2000 K). The equilibrium thermodynamic phases are determined by the changes in enthalpy and…
Dense ultrafine-grained (UFG) refractory MoW, MoWNb, and MoWNbTa alloys were fabricated by combining high-energy ball milling (HEBM) and spark plasma sintering (SPS), achieving ~92-96% relative densities and ~70-180 nm grain sizes. The…
Refractory High-Entropy Alloys (RHEAs) hold promising potential to be used as structural materials in future nuclear fusion reactors, where W and its alloys are currently leading candidates. Fusion materials must be able to withstand…
Bicontinuous nanoporous materials possess remarkable mechanical properties, such as higher specific strength and lower specific modulus compared to fully dense materials combined with low densities and high specific surface areas.…
In the quest of new materials that can withstand severe irradiation and mechanical extremes for advanced applications (e.g. fission reactors, fusion devices, space applications, etc), design, prediction and control of advanced materials…
New approaches for the design of alloy systems with multiprincipal elements is recently researched in refractory materials field. However, most research aimed at arc melting process with weakness of coarsening of grains and inhomogeneous…
A novel W-based refractory high entropy alloy with outstanding radiation resistance has been developed. The alloy was grown as thin films showing a bimodal grain size distribution in the nanocrystalline and ultrafine regimes and a unique 4…
Zinc alloys have emerged as promising candidates for biodegradable materials due to their remarkable biocompatibility and favorable mechanical characteristics. The incorporation of alloying elements plays an essential role in advancing the…
Two new refractory amorphous high-entropy alloys (RAHEAs) within the W--Ta--Cr--V and W--Ta--Cr--V--Hf systems were herein synthesized using magnetron-sputtering and tested under high-temperature annealing and displacing irradiation using…
Refractory high-entropy alloy (RHEA) is a promising class of materials with potential applications in extreme environments, where the dominant failure mode is thermal creep. The design of these alloys, therefore, requires an understanding…
High- and medium-entropy nitride coatings from the Cr-Hf-Mo-Ta-W-N system were studied using ab initio calculations and experiments to clarify the role of entropy and individual elements in phase stability, microstructure, and…
Bottom-up design of high-entropy ceramics is a promising approach for realizing materials with unique combination of high hardness and fracture-resistance at elevated temperature. This work offers a simple yet fundamental design criterion -…
High-entropy alloys (HEAs), as multi-component materials with high configurational entropy, have garnered significant attention as new biomaterials; still, their low yield stress and high elastic modulus need to be overcome for future…
Segregation engineering has emerged as a promising pathway towards designing thermally stable nanocrystalline alloys with enhanced mechanical properties. However, the compositional and processing space for solute stabilized microstructures…
Solute segregation is used to limit grain growth in nanocrystalline metals, but this stabilization often breaks down at high temperatures. Amorphous intergranular films can form in certain alloys at sufficiently high temperatures, providing…
We demonstrate the development of a series of refractory high-entropy alloys containing aluminum AlRHEAs in the ordered BCC-B2 phase by varying the aluminum content within 10 to 25 atomic percent, with the goal of high strength and good…
Nanocrystalline Cu-3 at.% Zr powders with ~20 nm average grain size were created with mechanical alloying and their thermal stability was studied from 550-950 {\deg}C. Annealing drove Zr segregation to the grain boundaries, which led to the…