Related papers: A Miniaturized Design of Drift Tube Ion Mobility S…
Quantum Diamond Microscope (QDM) magnetic field imaging is an emerging interrogation and diagnostic technique for integrated circuits (ICs). To date, the ICs measured with a QDM were either too complex for us to predict the expected…
We investigated the transport titanium ions produced in a reactive high-power impulse magnetron sputtering (HiPIMS) device used for TiN coating deposition. Time-resolved mass spectrometry measurements of ionized sputtered atoms correlated…
MIDAS (MIcrostrip Detector Array System) is a compact silicon tracking telescope for charged particles emitted at small angles in intermediate energy photonuclear reactions. It was realized to increase the angular acceptance of the DAPHNE…
Isochronous mass spectrometry (IMS) in storage rings is a powerful tool for mass measurements of exotic nuclei with very short half-lives down to several tens of microseconds, using a multicomponent secondary beam separated in-flight…
Recently, we reported an ion trap experiment with an integrated time-of-flight mass spectrometer (TOFMS) [Phys. Rev. Appl. 2, 034013 (2014)] focussing on the improvement of mass resolution and detection limit due to sample preparation at…
We report on the experimental characterization of the RIT-2.5 radiofrequency ion thruster, complemented by particle-in-cell (PIC) simulations to establish correlations between plasma parameters and extracted beam properties. The thruster…
Trapped matter-wave interferometers (TMIs) present a platform for precision sensing within a compact apparatus, extending coherence time by repeated traversal of a confining potential. However, imperfections in this potential can introduce…
The detection and tracking of small targets in passive optical remote sensing (PORS) has broad applications. However, most of the previously proposed methods seldom utilize the abundant temporal features formed by target motion, resulting…
A diffusion model, which is formulated to produce an image using thousands of denoising steps, usually suffers from a slow inference speed. Existing acceleration algorithms simplify the sampling by skipping most steps yet exhibit…
Plastic scintillation detectors are increasingly used to measure dose distributions in the context of radiotherapy treatments. Their water-equivalence, real-time response and high spatial resolution distinguish them from traditional…
Various diffusion MRI (dMRI) preprocessing pipelines are currently available to yield more accurate diffusion parameters. Here, we evaluated accuracy and robustness of the optimized Diffusion parameter EStImation with Gibbs and NoisE…
We propose a novel probe technique capable of performing local low-temperature spectroscopy on a 2D electron system (2DES) in a semiconductor heterostructure. Motivated by predicted spatially-structured electron phases, the probe uses a…
Optical tweezers can manipulate tiny particles. However, the distortion caused by the scattering medium restricts the applications of optical tweezers. Wavefront shaping techniques including the transmission matrix (TM) method are powerful…
This paper presents an attractive method towards sensing and quantifying the concentration of dielectric particles suspended in a highly conductive medium. Fast electrical impedance spectroscopy (EIS) measurements were performed, based on…
Total Internal Reflection Microscopy (TIRM) is a sensitive non-invasive technique to measure the interaction potentials between a colloidal particle and a wall with femtonewton resolution. The equilibrium distribution of the particle-wall…
This paper gives an overview of a recent development of measuring time of flight of minimum-ionizing particles (MIP) with mono-crystalline diamond detectors. The application in the HADES spectrometer as well as test results obtained with…
The use of Internet of Things (IoT) technologies is becoming a preferred solution for the assessment of tailings dams' safety. Real-time sensor monitoring proves to be a key tool for reducing the risk related to these ever-evolving…
Dynamic mechanical metamaterials (MMs) are artificial media composed of periodic micro-structures, designed to manipulate wave propagation. Modeling and designing these materials can be computationally demanding due to the broad design…
Scanning ion conductance microscopy (SICM) can image the surface topography of specimens in ionic solutions without mechanical probe--sample contact. This unique capability is advantageous for imaging fragile biological samples but its…
The Scanning Tunneling Microscope (STM) is a powerful instrument to study electronic density of states at surfaces down to atomic scale. Many interesting samples require studying variations as a function of the magnetic field, which is most…