Related papers: Optimal Beam Training for mmWave Massive MIMO usin…
Future wireless multiple-input multiple-output (MIMO) systems will integrate both sub-6 GHz and millimeter wave (mmWave) frequency bands to meet the growing demands for high data rates. MIMO link establishment typically requires accurate…
Fifth generation wireless systems are expected to employ multiple antenna communication at millimeter wave (mmWave) frequencies using small cells within heterogeneous cellular networks. The high path loss of mmWave as well as physical…
This work investigates the use of machine learning applied to the beam tracking problem in 5G networks and beyond. The goal is to decrease the overhead associated to MIMO millimeter wave beamforming. In comparison to beam selection (also…
The need for cables with high-fidelity Virtual Reality (VR) headsets remains a stumbling block on the path towards interactive multi-user VR. Due to strict latency constraints, designing fully wireless headsets is challenging, with the few…
Millimeter wave (mmWave) communication with large array gains is a key ingredient of next generation (5G) wireless networks. Effective communication in mmWaves usually depends on the knowledge of the channel. We refer to the problem of…
The best beam steering directions are estimated through beam training, which is one of the most important and challenging tasks in millimeter-wave and sub-terahertz communications. Novel array architectures and signal processing techniques…
Combining millimetre-wave (mmWave) communications with an extremely large-scale antenna array (ELAA) presents a promising avenue for meeting the spectral efficiency demands of the future sixth generation (6G) mobile communications. However,…
Large antenna arrays and millimeter-wave (mmWave) frequencies have been attracting growing attention as possible candidates to meet the high requirements of future 5G mobile networks. In view of the large path loss attenuation in these…
In order to cope with the severe path loss, millimeter-wave (mm-wave) systems exploit highly directional communication. As a consequence, even a slight beam misalignment between two communicating devices (for example, due to mobility) can…
Beamforming technique realized by the multiple-input-multiple-output (MIMO) antenna arrays has been widely used to compensate for the severe path loss in the millimeter wave (mmWave) bands. In 5G NR system, the beam sweeping and beam…
Millimeter-wave (mmWave) massive multiple-input multiple-output (MIMO) with hybrid precoding is a promising technique for the future 5G wireless communications. Due to a large number of antennas but a much smaller number of radio frequency…
This paper studies initial beam acquisition in a millimeter wave network consisting of multiple access points (APs) and mobile devices. A training protocol for joint estimation of transmit and receive beams is presented with a general frame…
The increasing complexity of configuring cellular networks suggests that machine learning (ML) can effectively improve 5G technologies. Deep learning has proven successful in ML tasks such as speech processing and computational vision, with…
Millimeter wave (mmWave) communication, utilizing beamforming techniques to address the inherent path loss limitation, is considered as one of the key technologies to support ever increasing high throughput and low latency demands of…
Employing large antenna arrays is a key characteristic of millimeter wave (mmWave) and terahertz communication systems. Due to the hardware constraints and the lack of channel knowledge, codebook based beamforming/combining is normally…
Last years we have witnessed the uprising of location based applications, which depend on the devices ability to accurately obtain their position. IEEE 802.11, foretelling the need for such applications, started the IEEE 802.11az work on…
The millimeter-wave (mmWave) technology, recently standardized by IEEE 802.11ad, is emerging as an attractive alternative to the traditional 2.4/5GHz wireless systems, promising multi-Gigabit wireless throughput. However, the high…
Hybrid multiple-input multiple-output (MIMO) is an attractive technology for realizing extreme massive MIMO systems envisioned for future wireless communications in a scalable and power-efficient manner. However, the fact that hybrid MIMO…
To support the high data rates for latency-critical applications, future wireless systems will employ fully digital beamforming multiple-input multiple-output (MIMO) architectures at millimeter wave (mmWave) frequencies. Moreover, mmWave…
This paper presents an experimental study on mmWave beam profiling on a mmWave testbed, and develops a machine learning model for beamforming based on the experiment data. The datasets we have obtained from the beam profiling and the…