Related papers: RF Properties and Their Variations in a 3D Printed…
3D-printing of radiofrequency (RF) cavity resonators could provide a cost-effective solution that enables rapid prototyping and design flexibility compared to traditional fabrication of full-metal cavities. In this work, the feasibility of…
A progogype 5-GHz 500-kW CW klystron (model E3762 provided by Toshiba Electron Tubes & Devices Co. Ltd.) has been operating as the RF source for the lower hybrid current drive (LHCD) system in the KSTAR tokamak. In order to investigate how…
A new bunching method, named "kladistron" has been developed at CEA in order to provide high efficiency klystrons. A first "kladistron" prototype was designed and realized. It was adapted from the 4.9 GHz TH2166 from Thales, where the…
Initial test results of an L-band multi-beam klystron with parameters relevant for ILC are presented. The chief distinction of this tube from MBKs already developed for ILC is its low operating voltage of 60 kV, a virtue that implies…
Additive manufacturing is a versatile technique that shows promise in providing quick and dynamic manufacturing for complex engineering problems. Research has been ongoing into the use of additive manufacturing for potential applications in…
The development of high gradient accelerating structures is one of the leading activities of the accelerator community. In the technological research of new construction methods for these devices, high-power testing is a critical step for…
For development of compact ultrafast electron source system, we are currently designing a short-pulse RF-gun with RF focusing structure by means of a series of comprehensive modeling analysis processes. EM design of a 2.5 cell resonant…
SRF cavity quality factors can be accurately measured using RF-power based techniques only when the cavity is very close to critically coupled. This limitation is from systematic errors driven by non-ideal RF components. When the cavity is…
In the framework of the Compact Light XLS project, a short ultra-high gradient linearizer working on the third harmonic of the main LINAC frequency is requested. Increasing gradients and reducing dimensions are requirements for XLS and all…
This paper introduces a newly designed cavity tuner for superconducting radio-frequency (SRF) cavity. Aiming to overcome the drawbacks of traditional tuning systems, like the limited tuning range of piezoelectric tuner and the low-speed…
The development of ultrahigh quality factor (Q) microresonators has been driving such technologies as cavity quantum electrodynamics (QED), high-precision sensing, optomechanics, and optical frequency comb generation. Here we report…
A new frequency converter, operating at significantly higher power and efficiency than previous devices, is described in this paper. The proposed device is implemented as a klystron structure where a new design principle is used. New…
High-power multi-beam klystrons represent a key component to amplify RF to generate the accelerating field of the superconducting radio frequency (SRF) cavities at European XFEL. Exchanging these high-power components takes time and effort,…
3D printing of plastics, ceramics, and metals has existed for several decades and has revolutionized many areas of manufacturing and science. Printing of metals in particular has found a number of applications in fields as diverse as…
Multicavity Klystron (MCK) is a high power microwave (HPM) vacuum electronic device used to amplify radio-frequency (RF) signals with numerous applications, including radar, radio navigation, space communication, television, radio…
We report on the realization of a hemispherical optical cavity with a finesse of F = 13000 sustaining inter-cavity powers of 10 kW, which we operate in a closed-cycle cryostat vacuum system close to 4 Kelvin. This was designed and built…
Self consistent analytic and numeric design for a set of electron guns with a high beams quality to be used in high power Ka-band klystrons are presented in this paper. The set of electron guns can be used in the high power Ka-band…
The technique presented in this paper enables the regulation of both radio frequency amplitude and phase in narrow band devices such as a Superconducting RF (SRF) cavity driven by constant power output devices i.e. magnetrons. The ability…
A new electromagnetic cavity structure, a lattice of 3D cavities consisting of an array of posts and gaps is presented. The individual cavity elements are based on the cylindrical re-entrant (or Klystron) cavity. We show that these cavities…
Three-dimensional (3D) superconducting microwave cavities with large mode volumes typically have high quality factors ($>10^6$). This is due to a reduced sensitivity to surface dielectric losses, which is the limiting source of dissipation…