Related papers: On the Threshold of Drop Fragmentation under Impul…
We address numerically the deformation and fragmentation dynamics of a single liquid drop subject to impulsive acceleration by a unidirectional gas stream. The density ratio between the liquid and gaseous phases is varied in the $10-2000$…
We experimentally investigate the deformation and breakup of droplets interacting with an oblique continuous air stream. A high-speed imaging system is employed to record the trajectories and topological changes of the droplets of different…
We study the rebound of drops impacting non-wetting substrates at low Weber number $We$ through experiment, direct numerical simulation, and reduced-order modeling. Submillimeter-sized drops are normally impacted onto glass slides coated…
This work examines the breakup of a single drop of various low viscosity fluids as it deforms in the presence of continuous horizontal air jet. Such a fragmentation typically occurs after the bulk liquid has disintegrated upon exiting the…
Droplet formation is relevant in many applications spanning natural and artificial settings. A physical understanding of aerobreakup or air-assisted secondary atomization and predicting size distributions in these applications is…
The impact of droplets on solids or weakly-deformable surfaces can lead to non-wetting outcomes, depending on the control parameters. Here, we perform experiments and develop a simple model to understand the impact dynamics by varying three…
A drop exposed to cross flow of air experiences sudden accelerations which deform it rapidly ultimately proceeding to disintegrate it into smaller fragments. In this work, we examine the breakup of a drop as a bag film with a bounding rim…
Breakup of liquid drops occurs in several natural and industrial settings. Fully resolved Volume of Fluid based simulations presented in this study reveal the complete flow physics and droplet dynamics that lead to the breakup of a drop in…
Bag breakup of drops has been a subject of interest for almost over a century. Several issues such as theoretical estimation of the regime boundary marking the onset of such breakup, bag growth rates, drop size distribution, and the effect…
The dynamics of drop impact on a rigid surface -- omnipresent in nature and technology -- strongly depends on the droplet's velocity, its size, and its material properties. The main characteristics are the droplet's force exerted on the…
The present study investigates the morphology and breakup dynamics of a freely falling drop in a vertical airstream using shadowgraphy and in-line holography. The in-line holography provides the temporal evolution of the volumetric size…
We investigate droplet deformation following laser-pulse impact at low Weber numbers (We ~ 0.1-100). Droplet dynamics can be characterized by two key parameters: the impact We number and the width, W, of the distribution of the impact force…
Aerobreakup of drops is a fundamental two-phase flow problem that is essential to many spray applications. A parametric numerical study was performed by varying the gas stream velocity, focusing on the regime of moderate Weber numbers, in…
Viscous droplets impinging on soft substrates may exhibit several distinct behaviours including repeated bouncing, wetting, and hovering, i.e., spreading and retracting after impact without bouncing back or wetting. We experimentally study…
Accurate prediction of the dynamics and deformation of freely moving drops is crucial for numerous droplet applications. When the Weber number is finite but below a critical value, the drop deviates from its spherical shape and deforms as…
The ambient gas pressure is determined for the onset of splashing of low-viscosity liquid drops on smooth dry surfaces as we change the control parameters: drop impact velocity, drop radius, viscosity, surface tension, density, and gas…
Predictive modelling of agglomeration in spray drying and particle capture in aerosol scavenging requires a fundamental understanding of droplet-particle collisions. The study complements prior work by investigating mid-air collisions…
The secondary atomization of liquid droplets is a common physical phenomenon in many industrial and engineering applications. Atomization in high speed compressible flows is less well understood than its more frequently studied low Mach…
In classical fluids, the Weber number is a dimensionless parameter that characterises the flow of a multi-phase fluid. The superfluid analogy of a classical multi-phase fluid can be realised in a system of two or more immiscible…
The breakup of non-Newtonian droplets is ubiquitous in numerous applications. Although the non-Newtonian property can significantly change the droplet breakup process, most previous studies consider Newtonian droplets, and the effects of…