Related papers: Martensite plasticity and damage competition in du…
This work presents a detailed experimental-numerical analysis of a low-carbon dual-phase steel microstructure, revealing evidence of significant anisotropic plastic deformation in lath martensite. A careful determination of the habit plane…
Experimental findings in the literature reveal that DP steels with identical strength and composition, but different microstructures, exhibit inconsistent trends under either necking-controlled or damage-controlled ductility tests. A…
In particular types of layer- or lamellar-like microstructures such as pearlite and lath martensite, plastic slip occurs favorably in directions parallel to inter-lamellar boundaries. This may be due to the interplay between morphology and…
Understanding the mechanism of martensitic transformation is of great importance in developing advanced high strength steels, especially TRansformation-Induced Plasticity (TRIP) steels. The TRIP effect leads to enhanced work-hardening rate,…
The onset of plasticity in quenched martensitic microstructures is characterized by a low initial yield stress followed by an extremely strong initial hardening response, and then a sudden hardening saturation. Literature attributes this…
This work explains the occurrence of transformation-induced plasticity via stress-assisted martensite, when designing ultrafine-grained duplex steels. It is found that, when the austenite is reduced to a fine scale of about 300 nm, the…
High performance sheet metals with a multi-phase microstructure suffer from deformation induced damage formation during forming in the constituent phases but importantly also where these intersect. To capture damage in terms of the physical…
In situ neutron diffraction of the uniaxial tension test was used to study the effect of the surrounding matrix microstructure on the mechanical stability of retained austenite in high-carbon bearing steels. Comparing the samples with…
Based on original investigations into the stages of nucleation and growth of martensite, a consideration has been given to dynamic models of formation of martensite plates with a fine structure of transformation twins, which are compatible…
The deformation behavior of nearly fully pearlitic, bainitic and martensitic steels during severe plastic deformation is summarized in this paper. Despite their significantly different yield stresses and their microstructures, their…
Transformation induced plasticity (TRIP) behavior was studied in steel with composition Fe-0.07C-2.85Si-15.3Mn-2.4Al-0.017N that exhibited two TRIP mechanisms. The initial microstructure consisted of both {\epsilon}- and…
We use the phase-field method to study the martensitic transformation at the nanoscale. For nanosystems such as nanowires and nanograins embedded in a stiff matrix, the geometric constraints and boundary conditions have an impact on…
Superelastic NiTi 1 shape memory alloy (SMA) wire was subjected to thermomechanical loading tests in tension to evaluate stress and temperature conditions under which the wire deforms plastically. Although the alloy demonstrated a very high…
My scientific activities aim at understand and predict the mechanical behaviour of steels, from fundamental mechanisms to macroscopic deformation. This manuscript is dedicated to the TWIP effect (TWinning Induced Plasticity) of high…
Multi-phase materials are key for modern engineering applications. They are generally characterized by a high strength and ductility. Many of these materials fail by ductile fracture of the, generally softer, matrix phase. In this work we…
Phase-field simulations of the martensitic transformation (MT) in the austenitic matrix, which has already undergone the plastic deformation, are carried out. For this purpose the elasto-plastic phase-field approach of incoherent MT…
In this study, the effect of ferrite grain size on the mechanical properties and dislocation behavior of dual-phase (DP) steel is investigated using dislocation-based crystal plasticity finite element analysis. DP steel, composed of a soft…
In this article we propose a discrete lattice model to simulate the elastic, plastic and failure behaviour of isotropic materials. Focus is given on the mathematical derivation of the lattice elements, nodes and edges, in the presence of…
Nitinol technology, besides utilizing the functional thermomechanical properties derived from the B2 cubic to B19' monoclinic martensitic transformation, also exploits the excellent plastic deformability of NiTi in the martensite state. It…
Diffusionless phase transitions are at the core of the multifunctionality of (magnetic) shape memory alloys, ferroelectrics and multiferroics. Giant strain effects under external fields are obtained in low symmetric modulated martensitic…