Related papers: Enhanced Low-resolution LiDAR-Camera Calibration V…

LIDAR and RADAR are two commonly used sensors in autonomous driving systems. The extrinsic calibration between the two is crucial for effective sensor fusion. The challenge arises due to the low accuracy and sparse information in RADAR…

For an autonomous vehicle, the ability to sense its surroundings and to build an overall representation of the environment by fusing different sensor data streams is fundamental. To this end, the poses of all sensors need to be accurately…

Accurate extrinsic calibration of multiple LiDARs is crucial for improving the foundational performance of three-dimensional (3D) map reconstruction systems. This paper presents a novel targetless extrinsic calibration framework for…

LiDAR provides accurate geometric measurements of the 3D world. Unfortunately, dense LiDARs are very expensive and the point clouds captured by low-beam LiDAR are often sparse. To address these issues, we present UltraLiDAR, a data-driven…

To realize low-latency spatial transmission system for immersive telepresence, there are two major problems: capturing dynamic 3D scene densely and processing them in real time. LiDAR sensors capture 3D in real time, but produce sparce…

LiDAR-based SLAM algorithms are extensively studied to providing robust and accurate positioning for autonomous driving vehicles (ADV) in the past decades. Satisfactory performance can be obtained using high-grade 3D LiDAR with 64 channels,…

LiDAR-camera extrinsic calibration is essential for multi-modal data fusion in robotic perception systems. However, existing approaches typically rely on handcrafted calibration targets (e.g., checkerboards) or specific, static scene types,…

Contemporary Low-Light Image Enhancement (LLIE) techniques have made notable advancements in preserving image details and enhancing contrast, achieving commendable results on specific datasets. Nevertheless, these approaches encounter…

This paper presents an open source LiDAR-camera calibration toolbox that is general to LiDAR and camera projection models, requires only one pairing of LiDAR and camera data without a calibration target, and is fully automatic. For…

The accurate and robust calibration result of sensors is considered as an important building block to the follow-up research in the autonomous driving and robotics domain. The current works involving extrinsic calibration between 3D LiDARs…

Point-pixel registration between LiDAR point clouds and camera images is a fundamental yet challenging task in autonomous driving and robotic perception. A key difficulty lies in the modality gap between unstructured point clouds and…

Recent progress in the automated driving system (ADS) and advanced driver assistant system (ADAS) has shown that the combined use of 3D light detection and ranging (LiDAR) and the camera is essential for an intelligent vehicle to perceive…

The homogeneous transformation between a LiDAR and monocular camera is required for sensor fusion tasks, such as SLAM. While determining such a transformation is not considered glamorous in any sense of the word, it is nonetheless crucial…

Mobile robots equipped with multiple light detection and ranging (LiDARs) and capable of recognizing their surroundings are increasing due to the minitualization and cost reduction of LiDAR. This paper proposes a target-less extrinsic…

The most prevalent routine for camera calibration is based on the detection of well-defined feature points on a purpose-made calibration artifact. These could be checkerboard saddle points, circles, rings or triangles, often printed on a…

LiDAR Upsampling is a challenging task for the perception systems of robots and autonomous vehicles, due to the sparse and irregular structure of large-scale scene contexts. Recent works propose to solve this problem by converting LiDAR…

Depth estimation is one of the key technologies in some fields such as autonomous driving and robot navigation. However, the traditional method of using a single sensor is inevitably limited by the performance of the sensor. Therefore, a…

LiDAR sensors are a key modality for 3D perception, yet they are typically designed independently of downstream tasks such as point cloud registration. Conventional registration operates on pre-acquired datasets with fixed LiDAR…

This article presents an innovative study in exploring, evaluating, and implementing deep learning architectures for the calibration of multi-modal sensor systems. The focus behind this is to leverage the use of sensor fusion to achieve…

Recently, the rapid development of Solid-State LiDAR (SSL) enables low-cost and efficient obtainment of 3D point clouds from the environment, which has inspired a large quantity of studies and applications. However, the non-uniformity of…