Related papers: Installation, Commissioning and Performance of Pha…
The phase averaging reference line system provides the RF phase reference, LO and clock signals to the LLRF and other accelerator sub-systems. The PIP-II linac has RF systems at three frequencies - 162.5 MHz, 325 MHz and 650 MHz. A…
Superconducting Radio-Frequency (SRF) cavities operating in continuous wave (CW) mode and with low beam loading are devices characterized by a high loaded quality factor, in the order of 10^7, and narrow bandwidth, in the order of 10 Hz.…
The LCLS-II RF system physically spans ~700m and has strict requirements -- on the order of 20 fs -- on the phase stability of the accelerating RF fields in its SRF linac. While each LLRF rack is crudely temperature-stabilized, the weather…
In MIMO systems, the presence of phase noise is a significant factor that can degrade performance. For MIMO testbeds build from SDR devices, phase noise cannot be ignored, particular in applications that require phase synchronization. This…
PIP-II is a superconducting linac that is in the initial acceleration chain for the Fermilab accelerator complex. The RF system consists of a warm front-end with an RFQ and buncher cavities along with 25 superconducting cryo-modules…
Synchronous reference frame phase-looked loop (SRF-PLL) techniques are widely used for interfacing and control applications in the power systems and energy conversion at large. Since a PLL system synchronizes its output with an exogenous…
LCLS-II is currently in its commissioning phase at SLAC. It is an X-ray FEL driven by a CW superconducting LINAC. The beam injector plays a crucial role in the overall performance of the accelerator, and is critical to the final electron…
The PEP-II B Factory Low-Level RF System (LLRF) is a fully programmable VXI based design running under an EPICS control environment. Several RF feedback loops are used to control longitudinal coupled-bunch modes driven by the accelerating…
In current MIMO mobile communication systems, phase noise can significantly impair performance. To allow for compensation of these impairments, accurate phase noise modeling is necessary. Numerical modeling of the phase noise process at a…
We describe a simple method for measuring the residual fast phase noise of a cavity-stabilized laser using the cavity as a reference. The method is based on generating a beat note between the laser output and the strongly filtered light…
The first generation Low-Level radio frequency(LLRF) control system independently developed by IMPCAS, the operating frequency is 162.5MHz for China ADS, which consists of superconducting cavity amplitude stability control, phase stability…
This contribution focuses on phase-noise added during frequency conversion in low-level radio frequency (LLRF) control systems. The stability of beams' parameters in linear accelerators depends on the stability of amplitude and phase of the…
There are many stages in the LLRF and RF system development process for any new accelerator that can take advantage of hardware emulation of the high-power RF system and RF cavities. LLRF development, bench testing, control system…
The goal of a LLRF system is to control an actual RF cavity with beam. While digital simulations have a place, having an analog circuit to stand in for the cavity can be tremendously helpful in validating hardware+firmware+software under…
PIP-II is an 800 MEV superconducting linac that is in the initial acceleration chain for the Fermilab accelerator complex. The RF system consists of a warm front-end with an ion source, RFQ and buncher cavities along with 25 superconducting…
The European Spallation Source (ESS) accelerator is composed of superconducting elliptical cavities. When the facility is running, the cavities are fed with electrical field from klystrons. Parameters of this field are monitored and…
The RF system for the Pohang Light Source (PLS) storage ring was greatly upgraded for PLS-II project of 400mA, 3.0GeV from 200mA, 2.5GeV. Three superconducting(SC) RF cavities with each 300kW maximum klystron amplifier were commissioned…
The value of residual phase noise, after phase compensation, is one of the key limitations of performance improvement for continuous-variable quantum key distribution using a local local oscillator (LLO CV-QKD) system, since it is the major…
The phase-resetting curve (PRC) describes the response of a neural oscillator to small perturbations in membrane potential. Its usefulness for predicting the dynamics of weakly coupled deterministic networks has been well characterized.…
The presented paper introduces a design for a phase-locked loop (PLL) that is utilized in frequency synthesis and modulation-demodulation within communication systems and in VLSI applications. The CMOS PLL is designed using 180 nm…