Related papers: Optimal Energy Shaping Control for a Backdrivable …
The application of biomechanic and motor control models in the control of bidedal robots (humanoids, and exoskeletons) has revealed limitations of our understanding of human locomotion. A recently proposed model uses the potential energy…
Humans rely on ankle torque to maintain standing balance, particularly in the presence of small to moderate perturbations. Reductions in maximum torque (MT) production and maximum rate of torque development (MRTD) occur at the ankle with…
The energy shaping method, Controlled Lagrangian, is a well-known approach to stabilize the under-actuated Euler Lagrange (EL) systems. In this approach, to construct a control rule, some nonlinear, nonhomogeneous partial differential…
A typical application of upper-limb exoskeleton robots is deployment in rehabilitation training, helping patients to regain manipulative abilities. However, as the patient is not always capable of following the robot, safety issues may…
Loss of mobility or balance resulting from neural trauma is a critical consideration in public health. Robotic exoskeletons hold great potential for rehabilitation and assisted movement, yet optimal assist-as-needed (AAN) control remains…
The modeling and simulation of coupled neuromusculoskeletal-exoskeletal systems play a crucial role in human biomechanical analysis, as well as in the design and control of exoskeletons. However, conventional dynamic simulation frameworks…
An impedance-based control scheme is introduced for cooperative manipulators grasping a rigid load. The position and orientation of the load are to be maintained close to a desired trajectory, trading off tracking accuracy by low energy…
This paper presents the design and implementation of an AI vision-controlled orthotic hand exoskeleton to enhance rehabilitation and assistive functionality for individuals with hand mobility impairments. The system leverages a Google Coral…
Within the concept of physical human-robot interaction (pHRI), the most important criterion is the safety of the human operator interacting with a high degree of freedom (DoF) robot. Therefore, a robust control scheme is in high demand to…
Human and humanoid posture control models usually rely on single or multiple degrees of freedom inverted pendulum representation of upright stance associated with a feedback controller. In models typically focused on the action between…
This paper proposes an adaptive gravity compensation (AGC) control strategy for a cable-driven upper-limb exosuit intended to assist the wearer with lifting tasks. Unlike most model-based control techniques used for this human-robot…
Balance control is important for human and bipedal robotic systems. While dynamic balance during locomotion has received considerable attention, quantitative understanding of static balance and falling remains limited. This work presents a…
Human-like motion is a primary goal for many robotic assistive devices. Emulating the strategy of the human neuromuscular system may aid the control of such powered devices, yet many challenges remain. In this study, we investigated the…
This work presents a novel rehabilitation framework designed for a therapist, wearing an inertial measurement unit (IMU) suit, to virtually interact with a lower-limb exoskeleton worn by a patient with motor impairments. This framework aims…
We consider irreversible and coupled reversible-irreversible nonlinear port-Hamiltonian systems and the respective sets of thermodynamic equilibria. In particular, we are concerned with optimal state transitions and output stabilization on…
While existing literature encompasses exoskeleton-assisted sit-stand tasks, the integration of energy recovery mechanisms remains unexplored. To push these boundaries further, this study introduces a portable pneumatic knee exoskeleton that…
A standard motion control with feedback of the output displacement cannot handle unforeseen contact with environment without penetrating into the soft, i.e. viscoelastic, materials or even damaging the fragile materials. Robotics and…
Lower Limb Exoskeletons (LLEs) are wearable robots that provide mechanical power to the user. Human-exoskeleton (HE) connections must preserve the user's natural behavior during the interaction, avoiding undesired forces. Therefore,…
This work presents a hierarchical framework for bipedal locomotion that combines a Reinforcement Learning (RL)-based high-level (HL) planner policy for the online generation of task space commands with a model-based low-level (LL)…
A spring in parallel with an effort source (e.g., electric motor or human muscle) can reduce its energy consumption and effort (i.e., torque or force) depending on the spring stiffness, spring preload, and actuation task. However, selecting…