Related papers: Progress of Diamond Digital Low Level RF

The low-level RF (LLRF) systems for linear accelerating structures are typically based on heterodyne architectures. The linear accelerators normally have many RF stations and multiple RF inputs and outputs for each station, so the…

Louisiana State University Center for Advanced Microstructures and Devices (CAMD) began a control system upgrade project in early 1997. At the time, the storage ring was controlled by a VAX/VMS system, primarily using CAMAC for I/O. The…

The linear accelerator (LINAC) at the Los Alamos Neu-tron Science Center (LANSCE) consists of Pre-buncher, Main-Buncher, low-energy beam transport (LEBT), four 201.25-MHz Drift Tube Linacs (DTLs) and forty-four 805-MHz Coupled Cavity Linacs…

The low-level RF (LLRF) systems for S-band linear accelerating structures are typically implemented with heterodyne base architectures. We have developed and characterized the next generation LLRF (NG-LLRF) based on the RF system-on-chip…

Raman lasers based on bulk diamond are a valuable resource for generating coherent light in wavelength regimes where no common laser diodes are available. Nevertheless, the widespread use of such lasers is limited by their high threshold…

The burgeoning interest within the space community in digital beamforming is largely attributable to the superior flexibility that satellites with active antenna systems offer for a wide range of applications, notably in communication…

The FLASH L-band (1.3 GHz) superconducting accelerator facility at DESY has a Low Level RF (LLRF) system that is similar to that envisioned for ILC. This system has extensive monitoring capability and was used to gather performance data…

The fast development of radio-frequency (RF) technologies increases the need for compact, low consumption and broadband real-time RF spectral analyser. To overcome the electronic bottleneck encountered by electronic solutions, which limits…

BPM (Beam Position Measurement) system is one of the most important beam diagnostic instruments in accelerators. A fully digital BPM (DBPM) has been designed for SSRF (Shanghai Synchrotron Radiation Facility). As Analog-to-Digital Converter…

A compact low-level RF (LLRF) control system based on RF system-on-chip (RFSoC) technology has been designed for the Advanced Concept Compact Electron Linear-accelerator (ACCEL) program, which has challenging requirements in both RF…

The first phase of the MYRRHA (Multi-purpose hYbrid Research Reactor for High-tech Applications) project, MINERVA, was launched in September 2018. Through collaboration with the SCK-CEN, IN2P3 laboratories take in charge the developments of…

The LCLS-II RF system physically spans ~700m and has strict requirements -- on the order of 20 fs -- on the phase stability of the accelerating RF fields in its SRF linac. While each LLRF rack is crudely temperature-stabilized, the weather…

PIP-II is a superconducting linac that is in the initial acceleration chain for the Fermilab accelerator complex. The RF system consists of a warm front-end with an RFQ and buncher cavities along with 25 superconducting cryo-modules…

SLAC National Accelerator Laboratory is collaborating with Arizona State University to design a LLRF system towards the advancement of the ASU Compact X-ray Light Source (CXLS). The CXLS is a phased project to develop small brilliant x-ray…

To improve RHIC luminosity for heavy ion beam energies below 10 GeV/nucleon, the Low Energy RHIC electron Cooler (LEReC) is currently under commissioning at BNL. The Linac of LEReC is designed to deliver a 1.6 MeV to 2.6 MeV electron beam,…

PIP-II is an 800 MEV superconducting linac that is in the initial acceleration chain for the Fermilab accelerator complex. The RF system consists of a warm front-end with an ion source, RFQ and buncher cavities along with 25 superconducting…

DIAMOND is a new synchrotron light source currently being designed in the UK. The control system for DIAMOND will be a site wide monitoring and control system for the accelerators, beamlines and conventional facilities. Initial work on the…

As a promising technology in beyond-5G (B5G) and 6G, dual-function radar-communication (DFRC) aims to ensure both radar sensing and communication on a single integrated platform with unified signaling schemes. To achieve accurate sensing…

Dual-function-radar-communication (DFRC) is a promising candidate technology for next-generation networks. By integrating hybrid analog-digital (HAD) beamforming into a multi-user millimeter-wave (mmWave) DFRC system, we design a new…

This article introduces a design of a Low Noise Amplifier (LNA), for the field of diamond particle detectors. This amplifier is described from simulation to measurements, which include pulses from {\alpha} particles detection. In hadron…