Related papers: Particulate suspension coating of capillary tubes
We study two-phase displacement via the steady compression of an air reservoir connected to an oil-filled capillary tube. Our experiments and modelling reveal complex displacement dynamics depending on compression rate and reservoir volume…
We report on the thinning of supported liquid films driven by thermocapillarity. The liquids are oil films, of initial thicknesses of a few tens of microns. A local and moderate heating of the glass substrate on which they are spread on…
When a droplet is generated, the ligament connecting the drop to the nozzle thins down and eventually pinches off. Adding solid particles to the liquid phase leads to a more complex dynamic, notably by increasing the shear viscosity.…
A growing body of experimental work indicates that physical vapor deposition provides an effective route for preparation of stable glasses, whose properties correspond in some cases to those expected for glasses that have been aged for…
Sorting elongated anisotropic particles, such as fibers, dispersed in suspensions poses significant challenges as they present two characteristic dimensions: length and diameter. Fibers in suspension usually align with the flow, leading to…
The stability of thin liquid coatings is of fundamental interest in every- day life. Homogeneous and non-volatile liquid coatings may dewet either by heterogeneous nucleation, thermal nucleation, or spinodal dewetting. Wetting and dewetting…
When a drop containing colloidal particles evaporates on a surface, a circular stain made of these particles is often observed due to an internal flow toward the contact line. To hinder this effect, several approaches have been proposed…
Liquid-infused membranes inspired by slippery liquid-infused porous surfaces (SLIPS) have been recently introduced to membrane technology. The gating mechanism of these membranes is expected to give rise to anti-fouling properties and…
We find solutions that describe the levelling of a thin fluid film, comprising a non-Newtonian power-law fluid, that coats a substrate and evolves under the influence of surface tension. We consider the evolution from both periodic and…
In capillary-driven fluid dynamics, simple departures from equilibrium offer the chance to quantitatively model the resulting relaxations. These dynamics in turn provide insight on both practical and fundamental aspects of thin-film…
The entrainment of air by advancing contact lines is studied by plunging a solid plate into a very viscous liquid. Above a threshold velocity, we observe the formation of an extended air film, typically 10 microns thick, which subsequently…
The paper focuses on a model describing the spreading of an insoluble surfactant on a thin viscous film with capillary effects taken into account. The governing equation for the film height is degenerate parabolic of fourth order and…
Flows of particles through bottlenecks are ubiquitous in nature and industry, involving both dry granular materials and suspensions. However, practical limitations of conventional experimental setups hinder the full understanding of these…
We consider the dynamic wetting and dewetting processes of films and droplets of complex liquids on planar surfaces, focusing on the case of colloidal suspensions, where the particle interactions can be sufficiently attractive to cause…
Colloidal particles hold promise for mobilizing and removing trapped immiscible fluids from porous media, with implications for key energy and water applications. Most studies focus on accomplishing this goal using particles that can…
We consider a porous solid covered with a water film (or with a drop) in situations where the liquid is pumped in, either spontaneously (if the porous medium is hydrophilic) or mechanically (by an external pump). The dynamics of dewetting…
A homogeneous thin polymer film with a stepped height profile levels due to the presence of Laplace pressure gradients. Here we report on studies of polymeric samples with precisely controlled, spatially inhomogeneous molecular weight…
The flow of deformable particles, such as droplets, dragged by a fluid, through a network of narrow pores inside rocks or other porous media is key in a range of applications, from enhanced oil recovery and water filtration to lab on a chip…
Micron-sized objects confined in thin liquid films interact through forces mediated by the deformed liquid-air interface. This capillary interactions provide a powerful driving mechanism for the self-assembly of ordered structures such as…
The motion of a gas-liquid interface along a solid wall is influenced by the capillary forces resulting from the interface's shape and its interaction with the solid, where it forms a dynamic contact angle. Capillary models play a…