Related papers: Simulating Airplane Aerodynamics with Body Forces:…
In aircraft design, structural optimization and uncertainty quantification concerning transonic aeroelastic issues are computationally impractical, because the iterative process requires great number of aeroelastic analysis. Emerging…
This paper investigates two distinct approaches to the dynamic modeling of aerial continuum manipulators (ACMs): the decoupled and the coupled formulations. Both open-loop and closed-loop behaviors of a representative ACM are analyzed. The…
In this report, we present the theory on aerodynamics of quadrotors using the well established momentum and blade element theories. From a robotics perspective, the theoretical development of the models for thrust and horizontal forces and…
The large active wing deformation is a significant way to generate high aerodynamic forces required in bat flapping flight. Besides the twisting, the elementary morphing models of a bat wing are proposed, such as wing-bending in the…
Direct dry-cooled power plants typically operate numerous large-diameter axial flow fans in air-cooled condensers to facilitate the condensation of steam in the plant thermodynamic cycle. Enhanced fan efficiency may, at scale, lead to…
This paper deals with the investigation of flow field due to clap and fling mechanism using immersed boundary coupled with lattice Boltzmann method. The lattice Boltzmann method (LBM), an alternative to Navier Stokes solver, is used because…
Flying animals resort to fast, large-degree-of-freedom motion of flapping wings, a key feature that distinguishes them from rotary or fixed-winged robotic fliers with limited motion of aerodynamic surfaces. However, flapping-wing…
Ducted fan lift systems (DFLSs) powered by two-stroke aviation piston engines present a challenging control problem due to their complex multivariable dynamics. Current controllers for these systems typically rely on proportional-integral…
Fixed-wing unmanned aerial vehicles (UAVs) offer significant performance advantages over rotary-wing UAVs in terms of speed, endurance, and efficiency. However, these vehicles have traditionally been severely limited with regards to…
We perform direct numerical simulations of laminar separated flows over finite-aspect-ratio swept wings at a chord-base Reynolds number of $Re = 400$ to reveal a variety of wake structures generated for a range of aspect ratios…
In this paper, we propose an inexact Augmented Lagrangian Method (ALM) for the optimization of convex and nonsmooth objective functions subject to linear equality constraints and box constraints where errors are due to fixed-point data. To…
This paper presents a lifting-wing multirotor UAV that allows long-range flight. The UAV features a lifting wing in a special mounting angle that works together with rotors to supply lift when it flies forward, achieving a reduction in…
Aeroelastic structures, from insect wings to wind turbine blades, experience transient unsteady aerodynamic loads that are coupled to their motion. Effective real-time control of flexible structures relies on accurate and efficient…
This paper presents the design of a nonlinear control law for a typical electromagnetic actuator system. Electromagnetic actuators are widely implemented in industrial applications, and especially as linear positioning system. In this work,…
A method for adaptive model order reduction for nonsmooth discrete element simulation is developed and analysed in numerical experiments. Regions of the granular media that collectively move as rigid bodies are substituted with rigid bodies…
Sliding tasks performed by aerial robots are valuable for inspection and simple maintenance tasks at height, such as non-destructive testing and painting. Although various end-effector designs have been used for such tasks, non-actuated…
Aerodynamic prediction of glaze ice accretion on airfoils and wing is studied using the Reynolds-averaged Navier-Stokes method. Two separation fixed turbulence models are developed considering the nonequilibrium characteristics of…
Flutter stability is a dominant design constraint of modern gas and steam turbines. To further increase the feasible design space, flutter-tolerant designs are currently explored, which may undergo Limit Cycle Oscillations (LCOs) of…
Aerial Manipulator Systems (AMS) have garnered significant interest for their utility in aerial operations. Nonetheless, challenges related to the manipulator's limited stiffness and the coupling disturbance with manipulator movement…
Modern aircraft are designed with redundant control effectors to cater for fault tolerance and maneuverability requirements. This leads to aircraft being over-actuated and requires control allocation schemes to distribute the control…