Related papers: A Multichannel RF Transceiver Array with mixed L-C…
The CMS Inner Tracker, made of silicon pixel modules, will be entirely replaced prior to the start of the High Luminosity LHC period. One of the crucial components of the new Inner Tracker system is the readout chip, being developed by the…
This letter presents an innovative design and implementation method for an ultra-wideband dual-polarized conformal phased array. The performance of single-layer continuous dipoles under bending conditions is evaluated through characteristic…
Microwave imaging for breast cancer detection is based on the contrast in the electrical properties of healthy fatty breast tissues. This paper presents an industrial, scientific and medical (ISM) bands comparative study of five microstrip…
In this letter, we propose a joint transmission mode and transmit/receive (Tx/Rx) antenna configuration scheme referred to as X-duplex in the relay network with one source, one amplify-and-forward (AF) relay and one destination. The relay…
The design of an improved microstrip antenna operating in the 28 GHz frequency spectrum is the main goal of this work. The design used a Roger RT 5880 LZ substrate with a thickness and permittivity of 0.762mm and 1.96, respectively. The…
Purpose: Receive array layout, noise mitigation and B0 field strength are crucial contributors to signal-to-noise ratio (SNR) and parallel imaging performance. Here, we investigate SNR and parallel imaging gains at 10.5 Tesla (T) compared…
In this work, a novel soft continuum robot-inspired antenna array is proposed, featuring tentacle-like structures with multiple antenna elements. The proposed array achieves reconfigurability through continuous deformation of its geometry,…
A multichannel thin-film sensor is implemented from a set of microstrip-coupled split-ring resonators (SRR's) with different dimensions. Each SRR exhibits a unique high-Q resonance that is sensitive to the presence of a sample in a…
Reconfigurable meta-surface (RMS) is proposed as a very promising and novel technology, which is composed of a large number of low-cost passive elements, and can achieve passive beamforming by controlling the amplitude and phase of incident…
Robust transceiver design against unresolvable system uncertainties is of crucial importance for reliable communication. For instance, full-duplex communication suffers from such uncertainties when canceling the self-interference, since…
Multispectral pedestrian detection is an important task for many around-the-clock applications, since the visible and thermal modalities can provide complementary information especially under low light conditions. Due to the presence of two…
Synchronization of transceiver chains is a major challenge in the practical realization of massive MIMO and especially distributed massive MIMO. While frequency synchronization is comparatively easy to achieve, estimating the carrier phase…
Perfect, broadband and asymmetric sound absorption is theoretically, numerically and experimentally reported by using subwavelength thickness panels in a transmission problem. The panels are composed of a periodic array of varying…
Multi-hop communication with the aid of large-scale antenna arrays will play a vital role in future emergence communication systems. In this paper, we investigate amplify-and-forward based and multiple-input multiple-output assisted…
Multi-target detection is one of the primary tasks in radar-based localization and sensing, typically built on phased array antennas. However, the bulky hardware in the phased array restricts its potential for enhancing detection accuracy,…
The BICEP/Keck Collaboration is currently leading the quest to the highest sensitivity measurements of the polarized CMB anisotropies on degree scale with a series of cryogenic telescopes, of which BICEP Array is the latest Stage-3 upgrade…
While the tracking detectors of the ATLAS and CMS experiments have shown excellent performance in Run 1 of LHC data taking, and are expected to continue to do so during LHC operation at design luminosity, both experiments will have to…
Efficient fiber-to-chip coupling has been a major hurdle to cost-effective packaging and scalable interconnections of photonic integrated circuits. Conventional photonic packaging methods relying on edge or grating coupling are constrained…
High-frequency electromagnetic fields (EMFs) are increasingly recognized either as environmental risk factors or as tools for electromagnetic attacks, which are difficult to detect in situ. Existing high-frequency EMF sensors face…
Mode-division multiplexing (MDM) is becoming an enabling technique for large-capacity data communications via encoding the information on orthogonal guiding modes. However, the on-chip routing of a multimode waveguide occupies too large…