Related papers: Update of beam coupling impedance evaluation by th…
The use of a wire probe is a robust method for beam profile measurement, but it can only provide a 1D projection of the beam profile. In this study, we developed a novel method for measuring a beam projected from a 360{\deg} angle by a…
Spatial coupling is utilized to improve the performance of iterative channel estimation, multiuser detection, and decoding for multiple-input multiple-input (MIMO) bit-interleaved coded modulation (BICM). Coupling is applied to both coding…
We experimentally determine the coupling strength between two strongly coupled nanomechanical modes using a Ramsey-inspired technique optimized for signals as short as four fringes. The method is applied to precisely probe the change of the…
We present here the concept of three-arm current comparator impedance bridge, which allows comparisons among three unlike impedances. Its purpose is the calibration of impedances having arbitrary phase angles, against calibrated nearly-pure…
Accurate calibration is crucial for using multiple cameras to triangulate the position of objects precisely. However, it is also a time-consuming process that needs to be repeated for every displacement of the cameras. The standard approach…
We present and analyze a method where parametric (two-photon) driving of a cavity is used to exponentially enhance the light-matter coupling in a generic cavity QED setup, with time-dependent control. Our method allows one to enhance…
We present a method to calibrate wavefront distortion of the spatial light modulator setup by registering far field images of several Gaussian beams diffracted off the modulator. The Fourier transform of resulting interference images…
High-precision surface roughness estimation plays an important role in many applications. However, the classical estimating methods are limited by shot noise and only can achieve the precision of 0.1 nm with white light interferometer.…
In this paper, we consider channel estimation for intelligent reflecting surface (IRS)-assisted millimeter wave (mmWave) systems, where an IRS is deployed to assist the data transmission from the base station (BS) to a user. It is shown…
This Paper deals design and simulation of electrostatically actuated clamped clamped beam and cantilever beam using finite element analysis method (FEM). A detailed study and performance analysis for various bias voltages is provided in…
A coherent, short-length reference arm reflectometer, which utilizes a 76-MHz repetition rate mode-locked fiber laser, was investigated experimentally for long fiber links (> 10 km). The reflectometer combines the advantages of optical…
Capacitance measurements are crucial for probing the electrical properties of materials. In this study, we develop and implement a capacitance measurement technique optimized for pulsed magnetic fields. Our approach employs an…
We present a broadly applicable in situ method for profiling ion beams using electrostatic deflectors and a Faraday cup. By deconvolving the detector geometry from the resulting current profiles, spatially resolved absolute current density…
In most multiple-input multiple-output (MIMO) communication systems, antennas are spaced at least half a wavelength apart to reduce mutual coupling. In this configuration, the maximum array gain is equal to the number of antennas. However,…
Coaxial 2-terminal bridge comparison is a widely used metrological method in the dissemination of value of capacitance up to 1000 pF and $10^4$ rad/s. In this range, capacitance can be measured with uncertainties as small as few parts in…
The rigorous coupled-wave analysis (RCWA) is one of the most successful and widely used methods for modeling periodic optical structures. It yields fast convergence of the electromagnetic far-field and has been adapted to model various…
We consider different approaches to simulate a modern X-ray beamline. Several methodologies with increasing complexity are applied to discuss the relevant parameters that quantify the beamline performance. Parameters such as flux,…
A high-resolution, intratrain position feedback system has been developed to achieve and maintain collisions at the proposed future electron-positron International Linear Collider (ILC). A prototype has been commissioned and tested with a…
In this paper, beam training and beam tracking are investigated for extremely large-scale multiple-input-multiple-output communication systems with partially-connected hybrid combining structures. Firstly, we propose a two-stage…
In this work, we extend the x-ray constrained wavefunction fitting approach, a key method in quantum crystallography for charge density reconstruction, to incorporate experimental observables beyond x-ray diffraction. Unlike traditional…