Related papers: A novel approach for FPGA-to-server data transmiss…

FPGA accelerators on the NIC enable the offloading of expensive packet processing tasks from the CPU. However, FPGAs have limited resources that may need to be shared among diverse applications, and programming them is difficult. We present…

This paper presents a system consisting of the FPGA IP core, the simple network protocol and the Linux device driver, capable of efficient and reliable data transmission from a low resources FPGA chip to the Linux-based embedded computer…

A common theme of data acquisition systems is the transport of data from digitising front-end modules to stable storage and online analysis. A good choice today is to base this on the ubiquitous, commercially and cheaply available Ethernet…

In high energy physics experiments (HEP), high speed and fault resilient data communication is needed between detectors/sensors and the host PC. Transient faults can occur in the communication hardware due to various external effects like…

A large number of data need to be transmitted in high-speed between Field Programmable Gate Array (FPGA) and Advanced RISC Machines 11 micro-controller (ARM11) when we design a small data acquisition (DAQ) system for nuclear experiments.…

Demands on Field-Programmable Gate Array (FPGA) data transport have been increasing over the years as frame sizes and refresh rates increase. As the bandwidths requirements increase the ability to implement data transport protocol layers…

We present test results and characterization of a data transmission system based on a last generation FPGA and a commercial QSFP+ (Quad Small Form Pluggable +) module. QSFP+ standard defines a hot-pluggable transceiver available in copper…

Industrial Ethernet is a technology widely spread in factory floors and critical infrastructures where a high amount of data need to be collected and transported. Fiber optic networks at gigabit rates fit well with that type of environments…

The increased bandwidth coupled with the large numbers of antennas of several new radio telescope arrays has resulted in an exponential increase in the amount of data that needs to be recorded and processed. In many cases, it is necessary…

User Datagram Protocol (UDP) is a commonly used protocol for data transmission in small embedded systems. UDP as such is unreliable and packet losses can occur. The achievable data rates can suffer if optimal packet sizes are not used. The…

This paper presents an RDMA over Ethernet protocol used for data acquisition systems, currently under development at the ESRF. The protocol is implemented on Xilinx Ultrascale + FPGAs thanks to the 100G hard MAC IP. The proposed protocol is…

Due to the advantages of universality, flexibility and high performance, fast Ethernet is widely used in readout system design of modern particle physics experiments. However, Ethernet is usually used together with TCP/IP protocol stack,…

As the development of electronic science and technology, electronic data acquisition (DAQ) system is more and more widely applied to nuclear physics experiments. Workstations are often utilized for data storage, data display, data…

The rapid growth of scientific data is surpassing advancements in computing, creating challenges in storage, transfer, and analysis, particularly at the exascale. While data reduction techniques such as lossless and lossy compression help…

State of the art detector readout electronics require high-throughput data acquisition (DAQ) systems. In many applications, e. g. for medical imaging, the front-end electronics are set up as separate modules in a distributed DAQ. A…

Intensive computation is entering data centers with multiple workloads of deep learning. To balance the compute efficiency, performance, and total cost of ownership (TCO), the use of a field-programmable gate array (FPGA) with…

The CHIME Pathfinder is a new interferometric radio telescope that uses a hybrid FPGA/GPU FX correlator. The GPU-based X-engine of this correlator processes over 819 Gb/s of 4+4-bit complex astronomical data from N=256 inputs across a 400…

With the increasing physical event rate and number of electronic channels, traditional readout scheme meets the challenge of improving readout speed caused by the limited bandwidth of crate backplane. In this paper, a high-speed data…

Scientific experiments rely on some type of measurements that provides the required data to extract aimed information or conclusions. Data production and analysis are therefore essential components at the heart of any scientific…

Memory resources in data centers generally suffer from low utilization and lack of dynamics. Memory disaggregation solves these problems by decoupling CPU and memory, which currently includes approaches based on RDMA or interconnection…