English
Related papers

Related papers: High efficiency holmium-doped triple-clad fiber la…

200 papers

We report on our realization of a high power holmium doped fiber laser, together with the validation of our numerical simulation of the laser. We first present the rare absolute measurements of the physical parameters that are mandatory to…

In this study, we revealed the impact of the pumping scheme, fiber length, pumping power, and reflectivity of the output fiber Bragg grating on the performance of a Tm^3+ -doped fiber laser (TDFL) operating at a wavelength of 1.72 \mu m.…

Optics · Physics 2024-05-14 Mohamed Zaki , Mostafa Abouricha , Said Amrane

Highly-doped holmium fibers have been prepared using modified chemical vapor deposition in combination with nanoparticle-doping method. Within a series of various Al2O3 and Ho3+ concentrations, relations between fibers composition and their…

We report the design and experimental and simulated performance for a 2050 nm band fiber amplifier with high optical-optical slope efficiency and low ion pairing, using a novel high performance single clad Ho-doped fiber from the Naval…

Signal Processing · Electrical Eng. & Systems 2026-04-02 Robert E. Tench , Wiktor Walasik , Alexandre Amavigan , Jean-Marc Delavaux , Colin C. Baker , Daniel Rhonehouse

Rare-earth-doped fiber lasers are emerging as promising high-power mid-infrared sources for the 2.6-3.0 {\mu}m and 3.3-3.8 {\mu}m regions based on erbium and holmium ions. The intermediate wavelength range, however, remains vastly…

Thulium-doped fibers suitable for core-pumped single-frequency lasers were fabricated by the modified chemical vapor deposition (MCVD) method. Refractive index profile, doping profile and spectral absorption was measured. High doping…

Structured-core thulium-doped fibers were developed to reduce heat load, enable shorter-wavelength operation, and achieve a pedestal-free design. In a proof-of-principle experiment, laser slope efficiencies of 52% at 1907 nm and 54% at 1940…

Large amounts of hyperpolarized 3He gas with high nuclear polarization rates are required for use in neutron spin filters or nuclear magnetic resonance imaging of human lung. Very high efficiency can be obtained by metastability exchange…

In this paper, a technique combing cascaded energy-transfer pumping (CEP) method and master-oscillator power-amplifier (MOPA) configuration is proposed for power scaling of 1.6-um-band single-frequency fiber lasers (SFFLs), where the Er3+…

We report on the writing of chirped volume Bragg gratings using 400 nm femtosecond pulses and the phase-mask inscription technique in the pure silica inner cladding of the gain fiber. The usefulness of such fiber component is demonstrated…

Optics · Physics 2019-09-02 Lauris Talbot , Pascal Paradis , Martin Bernier

An all-silica-fiber thulium-doped fiber laser emitting at 0.82 um on the transition from 3H4 to the ground state 3H6 outputs 105 W continuous-wave (CW) power and 555 W quasi-continuous-wave (QCW) instantaneous power with 0.96% duty cycle in…

We report on an ytterbium-free erbium-doped aluminophosphosilicate all-fiber laser, producing an output power of 25 W at a wavelength of 1584 nm with a slope efficiency of 30% with respect to the 976 nm absorbed pump power. The simple…

We report on high power operation of Er:Y2O3 ceramic laser at ~1.6 {\mu}m using low scattering loss, 0.25 at.% Er3+ doped ceramic sample fabricated in-house via co-precipitation process. The laser is in-band pumped by an Er, Yb fiber laser…

Optics · Physics 2022-01-19 Hangbin Xie , Jianing Zhang , Jun Wang , Dingyuan Tang , Deyuan Shen

Light source is indispensable component in on-chip system. Compared with hybrid or heterogeneous integrated laser, monolithically integrated laser is more suitable for high density photonic integrated circuit (PIC) since the capability of…

Emission at 4.6 um was observed from an N2O filled hollow core fiber laser. 8-ns pump pulses at 1.517 um excited a vibrational overtone resulting in lasing on an R and P branch fundamental transition from the upper pump state. At optimum…

We demonstrate yellow laser emission using silicate glass fiber as the gain medium. By employing core pumping using widely available GaN diode lasers with emission at 445 nm, we show that Dy3+-doped aluminosilicate glass fiber can be…

Optics · Physics 2021-10-14 Matthew R. Majewski , Stuart D. Jackson

Lab-on-a-Chip (LoC) devices combining microfluidic analyte provision with integrated optical analysis are highly desirable for several applications in biological oder medical sciences. While the microfluidic approach is already broadly…

We demonstrate mode-locking of a thulium-doped fiber laser operating at 1.94\mu m, using a graphene-based saturable absorber. The laser outputs 3.6ps pulses, with~0.4nJ energy and an amplitude fluctuation~0.5%, at 6.46MHz. This is a simple,…

Mesoscale and Nanoscale Physics · Physics 2015-06-11 M. Zhang , E. J. R. Kelleher , F. Torrisi , Z. Sun , T. Hasan , D. Popa , F. Wang , A. C. Ferrari , S. V. Popov , J. R. Taylor

Rare-earth-doped fiber lasers are promising contenders in the development of spectroscopy, free-space communications and countermeasure applications in the 3 - 5 {\mu}m spectral region. However, given the limited transparency of the…

We report on 33 % efficient generation of the first Stokes in a high concentration GeO2 fiber Raman laser pumped by a 22 W Thulium doped fiber laser. An output power of 4.6 W at 2.105 um is demonstrated.

‹ Prev 1 2 3 10 Next ›