Related papers: Unsteadiness in hypersonic leading-edge separation
A detailed experimental campaign is conducted to investigate the shear layer characteristics of an axisymmetric open cavity exposed to a Mach $6$ freestream. Experiments are performed in a Ludwieg tunnel for varying Reynolds numbers…
The paper gives experimental observations on the hypersonic flow past an axisymmetric flat-face cylinder with a protruding sharp-tip spike at a freestream Mach number of $M_\infty = 8.16$ at two different freestream Reynolds numbers based…
Shock-boundary layer interactions (SBLI) on hypersonic cone step flows exhibit a range of intrinsic unsteady behaviors, from shear-layer oscillations to large-scale pulsations. This work investigates the unsteadiness in a cone-step geometry…
The present numerical investigation focuses on the leading edge bluntness effects on the double-wedge with varied aft-wedge angles exposed to low enthalpy hypersonic free stream conditions. The bluntness ratio in this study varies, ranging…
Shock related unsteadiness over axisymmetric spiked body configurations is experimentally investigated at a freestream supersonic Mach number of 2.0 at 0$^\circ$ angle of attack. Three different forebody configurations mounted with a sharp…
The self-excited spanwise homogeneous perturbations arising in shock-wave/boundary-layer interaction (SWBLI) system formed in a hypersonic flow of molecular nitrogen over a double wedge are investigated using the kinetic Direct Simulation…
This experimental and numerical study examines transition to turbulence for a Cone-Cylinder-Flare geometry at Mach 7 and across a broad Reynolds number range. The focus is set on both attached boundary layers and separated shock-boundary…
Linear global instability of the three-dimensional (3-D), spanwise-homogeneous laminar separation bubble (LSB) induced by shock-wave/boundary-layer interaction (SBLI) in a Mach 7 flow of nitrogen over a $30^{\circ}-55^{\circ}$ double wedge…
The dynamics of shock-induced unsteady separated flow past a three-dimensional square-faced protuberance is investigated through wind tunnel experiments. Time-resolved schlieren imaging and unsteady surface pressure measurements are the…
Boundary layer transition triggered by a discrete roughness element generates a turbulent wedge that spreads laterally as it proceeds downstream. Historical literature reports the spreading half angle is approximately 6$^{\circ}$ in…
Hydraulic jumps are oftentimes encountered in natural and human-made environments. The transition from supercritical to subcritical flow involves large energy dissipation rates and substantial air entrainment, preventing the use of…
We utilize resolvent and weakly nonlinear analyses in combination with direct numerical simulations (DNS) to identify mechanisms for oblique transition in a Mach 5 hypersonic flow over an adiabatic slender double-wedge. Even though the…
The hypersonic flow stability over a two-dimensional compression corner is studied using resolvent analysis, linear stability theory (LST) and parabolised stability equation (PSE). The authors find that the interaction between upstream…
A direct numerical simulation of an oblique shock wave impinging on a turbulent boundary layer at Mach number 2.28 is carried out at moderate Reynolds number, simulating flow conditions similar to those of the experiment by Dupont et al.…
This study investigates a mechanism of controlling separated flows around an airfoil using a synthetic jet (SJ). A large-eddy simulation (LES) was performed for a leading-edge separation flow around a NACA0015 airfoil at the chord Reynolds…
The unsteady separated flow over the three-dimensional Boeing Gaussian Bump is investigated at a Reynolds number based on bump height $Re_H = 2.26\times10^5$ using unsteady wall-pressure measurements and planar particle image velocimetry…
The dynamics of a shock wave impinging on a transitional high-enthalpy boundary layer out of thermochemical equilibrium is investigated for the first time by means of a direct numerical simulation. The freestream Mach number is equal to 9…
In many engineering systems operating with a working fluid, the best efficiency is reached close to a condition of flow separation, which makes its prediction very crucial in industry. Providing that wall-based quantities can be measured,…
A quantitative analysis illustrating salient features of a Laminar Separation Bubble (LSB), its transition forming coherent structures, and associated heat transfer has been performed on a flat plate for varying free stream turbulence (fst)…
Recently, Kami\'nski et al. [1] demonstrated that a two-dimensional streamwise waviness with carefully selected amplitude and period can be effectively used in postponement of a flow separation at high Reynolds number which is out of reach…