Related papers: Metal Mesh IR Filter for wSMA
We demonstrate a free-space amplitude modulator for mid-infrared radiation (lambda=9.6 um) that operates at room temperature up to at least 20 GHz (above the -3dB cutoff frequency measured at 8.2 GHz). The device relies on the ultra-fast…
In this paper, mu-near-zero (MNZ) metamaterials are utilized to achieve an ultrathin absorber with a thickness of only about one percent of the operating wavelength. The metamaterial absorber (MA) is made of double-layered metallic spiral…
Although negative-refractive-index metamaterials have successfully achieved subwavelength focusing, image resolution is limited by the presence of losses. In this Letter, a metal transmission screen with subwavelength spaced slots is…
RFI mitigation in Radioastronomy can be achieved adopting cryogenic filters in appropriate typologies. A study has been conducted in L, C and X band with the evaluation of the filter architecture in copper, with theoretical estimation,…
Optical interferometers with suspended mirrors are the archetype of all current audio-frequency gravitational-wave detectors. The radiation pressure interaction between the motion of the mirror and the circulating optical field in such…
Subwavelength diffractive optics known as meta-optics have demonstrated the potential to significantly miniaturize imaging systems. However, despite impressive demonstrations, most meta-optical imaging systems suffer from strong chromatic…
High-reflectance in many state-of-the-art optical devices is achieved with noble metals. However, metals are limited by losses, and for certain applications, by their high mass density. Using a combination of ab initio and optical transfer…
Historically employed spectroscopic architectures used for large field of view mapping spectroscopy in millimetere and sub-millimetre astronomy suffer from significant drawbacks. On-chip filterbank spectrometers are a promising technology…
We report the design and implementation of a high-flux, high-efficiency magneto-infrared spectroscopy system optimized for broadband measurements in high magnetic fields. The setup integrates a Fourier transform infrared spectrometer, a 12…
Fundamentally new technology is described for constructing low areal mass density (1kg/m^2), high precision (< 10micron RMS) reflectors scalable to large apertures (10 to 20 meters) for use as the primary element of a telescope system. A…
Nonlinear interferometry has widespread applications in sensing, spectroscopy, and imaging. However, most implementations require highly reflective mirrors and precise optical alignment, drastically reducing their versatility and usability…
Observations at far-infrared and submillimeter wavelengths promise to revolutionize the study of high redshift galaxies and AGN by providing a unique probe of the conditions within heavily extinguished regions of star formation and nuclear…
A quasi-optical (QO) test bench was designed, simulated, and calibrated for characterizing S-parameters of devices in the 220-330 GHz (WR-3.4) frequency range, from room temperature down to 4.8 K. The devices were measured through vacuum…
In metal-enhanced fluorescence (MEF), the localized surface plasmon resonances of metallic nanostructures amplify the absorption of excitation light and assist in radiating the consequent fluorescence of nearby molecules to the far-field.…
Epsilon-near-zero (ENZ) metamaterial slabs at visible frequencies based on metal-dielectric multilayers are experimentally realized. Transmission, reflection and absorption spectra are measured and used to determine the complex refractive…
One terahertz (THz) waveguide based on 3D printed metallic photonic crystals is experimentally and numerically demonstrated in 0.1-0.6 THz, which consists of periodic metal rod arrays (MRAs). Results demonstrated that such waveguide…
Microwave interferometer in the Limiter Shadow (MILS) is a new diagnostic, installed on ASDEX Upgrade for electron density measurements in the far Scrape-Off Layer (SOL). At the chosen frequency of 47 GHz the region of measurements varies…
Compared with traditional infrared thermal imaging, polarimetric imaging provides additional polarization information, which effectively enhances object contours and image contrast, with broad application in both military and civilian…
We describe a THz spectrometer operating between 1.2 and 10.5 THz, consisting of band pass filters made with metasurfaces. The source is made of 10 W small black body. The detector is a high sensitivity room temperature pyroelectric sensor.…
We developed a technique that enables to replace a metallic waveguide cladding with a low-index (n $\sim$ 1.4) material - CaF2 or BaF2 - that in addition is transparent from the mid-IR up to the visible range: elevated confinement is…