Related papers: STEER: Beam Selection for Full-Duplex Millimeter W…
Millimeter-wave will be a key technology in next-generation wireless networks thanks to abundant bandwidth availability. However, the use of large antenna arrays with beamforming demands precise beam-alignment between transmitter and…
Millimeter wave (mmWave) communication represents one of the main innovations of the next generation of wireless technologies, allowing users to reach unprecedented data rates. To overcome the high path loss at mmWave frequencies, these…
Millimeter Wave (mm-w), especially the 60 GHz band, has been receiving much attention as a key enabler for the 5G cellular networks. Beamforming (BF) is tremendously used with mm-w transmissions to enhance the link quality and overcome the…
In this paper, we investigate the beam alignment problem in millimeter-wave (mmWave) distributed antenna systems where a home base station communicates with multiple users through a number of distributed remote radio units (RRUs).…
Beam management is central in the operation of beamformed wireless cellular systems such as 5G New Radio (NR) networks. Focusing the energy radiated to mobile terminals (MTs) by increasing the number of beams per cell increases signal power…
Radio frequency-orbital angular momentum (RF-OAM) is a novel approach of multiplexing a set of orthogonal modes on the same frequency channel to achieve high spectrum efficiencies. Since OAM requires precise alignment of the transmit and…
Millimeter wave (mmWave) communication is a promising technology for 5G cellular systems. To compensate for the severe path loss in mmWave systems, large antenna arrays are generally used to achieve significant beamforming gains. However,…
Millimeter wave (mmWave) communication with large antenna arrays is a promising technique to enable extremely high data rates due to the large available bandwidth in mmWave frequency bands. In addition, given the knowledge of an optimal…
Millimeter-wave (mmWave) systems use directional beams to support high-rate data communications. Small misalignment between the transmit and receive beams (e.g., due to the mobility) can result in significant drop of the received signal…
To meet the requirements for high data rates and ubiquitous connectivity in 6G networks, higher frequencies and larger array apertures are employed to enhance spatial resolution and spectral efficiency. This evolution leads to an expansion…
Physical layer security is a key issue in the full duplex (FD) communication systems due to the broadcast nature of wireless channels. In this paper, the joint design of information and artificial noise beamforming vectors is proposed for…
In this paper, a full-duplex unmanned aerial vehicle (FD-UAV) relay is employed to increase the communication capacity of millimeter-wave (mmWave) networks. Large antenna arrays are equipped at the source node (SN), destination node (DN),…
This paper develops a novel methodology for designing analog beamforming codebooks for full-duplex millimeter wave (mmWave) transceivers, the first such codebooks to the best of our knowledge. Our design reduces the self-interference…
The millimeter-wave (mmWave) communication technology, which employs large-scale antenna arrays, enables inherent sensing capabilities. Simultaneous localization and mapping (SLAM) can utilize channel multipath angle estimates to realize…
Millimeter Wave (mmWave) communications with full-duplex (FD) have the potential of increasing the spectral efficiency, relative to those with half-duplex. However, the residual self-interference (SI) from FD and high pathloss inherent to…
Millimeter wave wireless systems rely heavily on directional communication in narrow steerable beams. Tools to measure the spatial and temporal nature of the channel are necessary to evaluate beamforming and related algorithms. This paper…
Dynamic metasurface antennas (DMAs) provide a new paradigm to realize large-scale antenna arrays for future wireless systems. In this paper, we study the downlink millimeter wave (mmWave) DMA systems with limited number of radio frequency…
In a cell-free wireless network, distributed access points (APs) jointly serve all user equipments (UEs) within the their coverage area by using the same time/frequency resources. In this paper, we develop a novel downlink cell-free…
Millimeter-wave (mmWave) MIMO systems rely on highly directional beamforming to overcome severe path loss and ensure robust communication links. However, selecting the optimal beam pair efficiently remains a challenge due to the large…
Communication at millimeter wave (mmWave) bands is expected to become a key ingredient of next generation (5G) wireless networks. Effective mmWave communications require fast and reliable methods for beamforming at both the User Equipment…